input for ego usb charger

[renoman]

The wall adapter for my joytech ego usb charger has an output of 5volts at 500ma.
What will happen if I plug the charger into my I-phone wall adapter that has an output of 5volts at 1amp (1000ma)?
Or for that matter a computer usb in, that I think is a 2amp output?
Im a little worried it will fry,is there any concern?

 

[denali_41]

i interchange everything that has a usb charger,and have been doing it for more then four years now with absolutely no problems ,,other then i have had three wall warts fry when i first plugged them in

most everybody else will say it is bad,,you decide

 

[Renzuli]

Welcome , but better safer , than sorry . Use the chargers and adapters that come with your PV , and/or phone . Then you won't have to worry about it .

 

[GRIBOUILLE22]

Nothing happen, you can use and charging your ego on your computer, the internal battery of your ego take only need strongest current, more can make less, don't worry

for example your ego need only 500 ma, and you connect on you computer can give 2000 ma, the ego take only 500 ma
i try it and it work very well

 

[Jabbathewocket]

The only thing that matters is that you have enough to feed the battery, the USB chargers are USB for a reason they are meant to charge off PC USB ports as well as the wall-wart devices that they came with as well as off your PC..

You may find that the front panels of many PC do NOT provide enough juice to charge either your ecig or your iphone.. (same deal with USB hubs that are not "powerd" externally via the wall) but even then they will EVENTUALLY charge the device just slowly (as with ipad)

 

[ryan1122]

My ego charger didn't come with a wall adapter so i use the one for my phone. Is this ok/safe? Ive had it for about 3 weeks and haven't noticed any problems.

 

[ka724ka]

My Ego-T also did not come with the walwart charger, I use my cellphone charger (Samsung s2) at work without problem.

 

[HawkeyeFLA]

As long as the part that plugs into the wall can put out 5v at around 500mah (That's the specs on the Joye branded charger) you're fine. The charger itself seems to put out around 4.2v at 420mah, so you want the wall wart to be able to generate more than that.

 

[ryan1122]

My phone charger puts out 5.1 v at 850 mah...so i guess im good