INTEGRATED BATTERY MOD THREAD

Status
Not open for further replies.

WharfRat1976

Vaping Master
ECF Veteran
Verified Member
May 31, 2014
4,731
5,980
Austin, Texas
Just bought the MVP4. My very first mod was the MVP and the thing still works. The 4 has a 4500MaH integrated batt. Some reviews say it lasts a day and a half firing at 50 watts. I hope to put two of these in the rotation and be done with batts once and for all.

I am so sick of dealing with and buying and charging and toting around batteries.

If there are other integrated mods please post here. Please include custom mod makers as well as all commercial mods that have an integrated system.

www.myvaporstore.com/Innokin-MVP-4-100W-TC-Box-Mod-p/ink-mvp410.htm
 

SteveS45

Moved On
ECF Veteran
Jan 27, 2016
8,177
16,842
63
Long Island, New York
eLeaf Aster RT22 is one fairly new model that I own and it is a TC MOD that uses a Melo RT22 Tank.

upload_2017-5-23_19-48-50.png


In the background is my 1st MOD the iStick TC40W
 

zoiDman

My -0^10 = Nothing at All*
Supporting Member
ECF Veteran
Apr 16, 2010
41,589
1
84,625
So-Cal
Nice. Happen to try the topfill shadow tank that comes with some? I'd be happy to rotate 2 of these daily, if the tanks easily refilled.

Wait, it starts at 7W. Means it doesn't buck?

The Mod is Great. Does VW from 7 ~ 40W in .5 watt Increments (something I thought I wouldn't like - but Actually Like A lot). Also does TC quite well.

I tried about 5 Hits off the Shadow Tank and it got Tossed into the to be PIF-ed box. Something very Really Funky about those Coils.

So Great Mod. Sub-Par Tank IMO.
 

zoiDman

My -0^10 = Nothing at All*
Supporting Member
ECF Veteran
Apr 16, 2010
41,589
1
84,625
So-Cal
Nice. Happen to try the topfill shadow tank that comes with some? I'd be happy to rotate 2 of these daily, if the tanks easily refilled.

Wait, it starts at 7W. Means it doesn't buck?

BTW - You need a 22mm Diam. Tank witch is about 44mm/1.735" in height (without 510 connector or Drip Tip) or taller to use in a Tesla Stealth 40w.

If the Tank is much Shorted, it is a PITA to Screw/Unscrew it in the Mod.

The Opening in 24mm. So a 23mm Tank should work. I just have Never Tried one because I don't own any 23mm Tanks.
 

RayofLight62

Super Member
ECF Veteran
Jan 10, 2015
610
1,851
Kent - United Kingdom
Sigelei J150. It has a great look with the two color tone. It fires up to 150 Watt, unlike the 213 which doesn't achieve 213 watt.
TC with SS works fine, provided the 510 connector is well cleaned and tight, and the pre-heat timer is properly set for the task.
The internal battery, sadly, packed up after four months of use. I replaced the Li-po battery with two 1.2 Ah IMR 18500 batteries, and now it works again very well. I have been surprised by the fact that the runtime with the new 1.2 Ah battery is very similar to the original 2.0 Ah battery.
As all Sigelei mods, the J150 fires at minimum 10 W; as I am both a tootle puffer and a cloud chaser (90% - 10%), I can't use the J150 for proper low power vaping.
Very nice looking internal battery mod, but the battery is not up to my expectations.
 

T0mmy1977

Super Member
ECF Veteran
  • Mar 1, 2015
    929
    1,402
    I like the ipower too, 80 watt mod with a 5000mah battery but there is also a 200 watt istick with the same 5000mah :)
    I have the iPower 80 being delivered today. I didn't know there was a 200 watt Eleaf mod with an internal battery. I bought it to use with RTAs that don't need more than 60-80 watts, so I'm not disappointed. Just uninformed! :)
     
    • Like
    Reactions: Skold
    Status
    Not open for further replies.

    Users who are viewing this thread