Introducing the Griffin Rebuildable Atomizer Tank

[Swarley]

the size is 1.25" x 2.0"

so far everyone I have asked said it's ok, so I put them online, I'll try to save the worst for last LOL
wire is online also and the spare parts in a mini "kit"

please remember this is for convenience only you can most likely get all this stuff cheaper in bulk.


Also the Griffin air hole has been expanded by 50% for more air, so it is now 1.5mm (about)
I will get some spare tops next order so those of you who want a top with a bigger hole than the original can get one without buying a new griffin

Dang I just spent $140 dollars today on vapegear and now I'm about to spend more because I wanna try the other top cap n such. I think I have a problem guys I see a vapegear intervention in my near future lol. I know you already mentioned it but any word on some clear tanks?

 

[gormly]

I sure hope some of this stuff is still around next month when I can go on another "spending spree".

I don't plan on stopping and will be ordering again so you'll always be a week away at most (when they are not on vacation)
I am going to invest all the profits from this run to buy a bigger run next time and so on.

 

[Big Screen D]

Before I check out, any other rebuild-able bottom coil clones on the horizon?

 

[anavidfan]

This is a very nice "DID" clone or what other are calling the "DUD" or "DIDNT" at a great price. Very tempting. Ive been contemplating getting it for a while. There was a co-op here and it sold out, and from all the reviews a great product that produces a great tasting and great cloud. Easy rebuild and so customizable.

BTW, Any idea if you will be carrying the Phoenix RA XL? just saw this on at the Phoenix site and it looks cool,

 

[gormly]

Before I check out, any other rebuild-able bottom coil clones on the horizon?

On the horizon, yes, in stock, not in the next week or so

Any idea if you will be carrying the Phoenix XL? just saw this on at the Phoenix site and it looks cool, this is a very nice "DID" clone or what other are calling the "DUD" or "DIDNT" at a great price. Very tempting. Ive been contemplating getting it for a while. There was a co-op here and it sold out, and from all the reviews a great product that produces a great tasting and great cloud. Easy rebuild and so customizable.

I would imagine so yes, I will ask and get them if possible.
send me a link via email?

 

[Swarley]

Any idea if you will be carrying the Phoenix XL? just saw this on at the Phoenix site and it looks cool, this is a very nice "DID" clone or what other are calling the "DUD" or "DIDNT" at a great price. Very tempting. Ive been contemplating getting it for a while. There was a co-op here and it sold out, and from all the reviews a great product that produces a great tasting and great cloud. Easy rebuild and so customizable.

I have been wondering the same thing. I have been checking the eshotsph website everyday to see if they have found a U.S. supplier but still no. I think Eric should get some of these I like the upgrades they made to it. Hopefully Eric can manage to get some

 

[Swarley]

check eshotsph.com Eric

 

[gormly]

check eshotsph.com Eric

Yea, that was a "duh" moment LOL

Got it, but honestly I do not see how that is in any way much bigger, the base is the same it looks like, if it's a little deeper maybe but 16mm is just 2mm wider, so not much here. Unless I am missing something.

That said, I have an in, so I am pretty sure I can get them.

 

[lithod02]

anyone elses drip tip not fit? Mine falls out if you lean griffin to side, gonna see if i can find a fatter o-ring.

Guess mine was only one in first batch that had really loose fitting drip tip oh well! Will wait till they perfect it more unless Eric gets replacement o-rings for them... bummed

 

[gormly]

Guess mine was only one in first batch that had really loose fitting drip tip oh well! Will wait till they perfect it more unless Eric gets replacement o-rings for them... bummed

have you tried a stainless drip tip, most of mine "fit" with a bit of pushing, and it ends up being a good one, I tossed the stock drip tip on mine.


also, bring it into Home Depot, they have a whole section of Orings I think it's 12mm OD and 10mm ID (I think)

 

[Swarley]

Yea, that was a "duh" moment LOL

Got it, but honestly I do not see how that is in any way much bigger, the base is the same it looks like, if it's a little deeper maybe but 16mm is just 2mm wider, so not much here. Unless I am missing something.

That said, I have an in, so I am pretty sure I can get them.

The biggest improvement imho is the fact that the juice cup coil area is now removable Makes it easier to clean. The size is a little bigger but not a huge amount so could probably only fit a few more drops in but I'm ok with that. PLus they took out the plastic that was around the bottom area of the posts Then I don't have to worry about making sure That my coil doesn't touch that part

 

[Big Screen D]

On the horizon, yes, in stock, not in the next week or so



I would imagine so yes, I will ask and get them if possible.
send me a link via email?

Thanks Eric. Love these, and should probably order more than just a few. Will hold of on buying one for each juice flavor for now, and just get a few more for now. Just in case of the unlikely event I prefer the bottom coil RBA tank clones better when you get hold of them.

Isn't the Griffin and what is referred to as the DUD one and the same? Perhaps not since the "Griffin is anything but a dud.

 

[lithod02]

I tried a couple of tips I have (came with vmod xl) not metal/stainless and still didn't fit, I will check home depot next time I get out that way. Thanks for sizes Eric

have you tried a stainless drip tip, most of mine "fit" with a bit of pushing, and it ends up being a good one, I tossed the stock drip tip on mine.


also, bring it into Home Depot, they have a whole section of Orings I think it's 12mm OD and 10mm ID (I think)

 

[Big Screen D]

The picture in my email looks like there is a picture of Griffin stamped on the newer Griffin. Or am I seeing things?

Edit: I see now its just the hind end. Time for some shut eye.

 

[Swarley]

I wish that would be cool. I would do it myself if I had steady hands

 

[gormly]

The biggest improvement imho is the fact that the juice cup coil area is now removable Makes it easier to clean. The size is a little bigger but not a huge amount so could probably only fit a few more drops in but I'm ok with that. PLus they took out the plastic that was around the bottom area of the posts Then I don't have to worry about making sure That my coil doesn't touch that part

the new wyvern has a removable cup

 

[gormly]

The picture in my email looks like there is a picture of Griffin stamped on the newer Griffin. Or am I seeing things?

Edit: I see now its just the hind end. Time for some shut eye.

photoshop trickery to add the logo I made
not very good, I missed a spot.

 

[CountSmackula]

I guess so. Mine fit tightly. My other drip tips fit it fine & it's drip tip fits my other clearos & tanks snugly. Maybe you just got a bad o-ring?

Guess mine was only one in first batch that had really loose fitting drip tip oh well! Will wait till they perfect it more unless Eric gets replacement o-rings for them... bummed

 

[Swarley]

the new wyvern has a removable cup

Check out this video when you can. It shows more of what I meant

Phoenix XL Rebuildable Follow-up & Using SS Mesh With Silica Wick - YouTube

 

[CountSmackula]

Yeah, by the anti-clone, big money spending DID crowd.

Isn't the Griffin and what is referred to as the DUD one and the same? Perhaps not since the "Griffin is anything but a dud.