- Status
I've read from a number of sources that another solution is to sand/file down the top of the cone... which give additional space at the top for the airflow
That is a good idea as well. It will probably also depend on the cone. I am going to get the Dremel out tomorrow and widen the top of my cone. It is to tight a fit anyway.
I will say it was a hit tonight at the burlesque show. Could have sold a few as well. Three girls I know just have to have one now. I pulled it out of my pocket and didn't see it again till the end of the night.
Last edited:
Okay I promise this is the last two photos of the Kanger T4 I will upload. I had a couple of online and real world questions asked about stealth vaping and using the 510-510 adapter making the use of the eGo thread cone. The cone is not installed in these shots, but it does work and looks just okay, but yes it does work.
The pen cap in the photos is a GotVapes product, it is the 2 Piece eGo Cone Screw On Pen Cap. It makes for a perfect fit with the 510-510 adapter, but can be used without as well. Without the adapter the tip sits lower in the pen cone yet still sticks out enough to use.
Pairing this very cool little clearomizer with the pen cap cone and mini eGo should be a kit available on GotVapes, at least I think so.
The pen cap in the photos is a GotVapes product, it is the 2 Piece eGo Cone Screw On Pen Cap. It makes for a perfect fit with the 510-510 adapter, but can be used without as well. Without the adapter the tip sits lower in the pen cone yet still sticks out enough to use.
Pairing this very cool little clearomizer with the pen cap cone and mini eGo should be a kit available on GotVapes, at least I think so.
Wow, this is so, so sexy! I am now saddened that I just ordered a KGO kit. If I would have known this was available I might have gotten something else. I am just getting back into vaping after more then 2 years. I don't know if my 510 batts are any good anymore. I sure hope they are, because I want to use this with them so insanely bad!
Okay I promise this is the last two photos of the Kanger T4 I will upload. I had a couple of online and real world questions asked about stealth vaping and using the 510-510 adapter making the use of the eGo thread cone. The cone is not installed in these shots, but it does work and looks just okay, but yes it does work.
The pen cap in the photos is a GotVapes product, it is the 2 Piece eGo Cone Screw On Pen Cap. It makes for a perfect fit with the 510-510 adapter, but can be used without as well. Without the adapter the tip sits lower in the pen cone yet still sticks out enough to use.
Pairing this very cool little clearomizer with the pen cap cone and mini eGo should be a kit available on GotVapes, at least I think so.
Holy hell! it just keeps getting crazier! It looks like a marker!
I really, really love this little baby. I have 3 of them right now. The first one has been going for about a week and has seen 50 State Salute (70/30) @ 4ml, Hazelnut Coffee (75/25) @ 3ml, Buttery Nipple (75/25) @ 2ml, and currently Pumpkin Pie (50/50) @ 2.5ml (so far). Rinsed a couple of times in hot water, swirled in vodka for about 2-3min, another hot water rinse, blow out, then let it air dry in front of a small heater for about 1-2hrs. After that, I did a short dry burn and refilled. Vapes beautifully with no leftover flavor from the previous juice. Love it! Currently have them filled with Pumpkin Pie, Key Lime Pie, and a Vanilla Coffee. I find the flavor comparable, if not a bit better than, my mini Vivi Nova.
Any chance of GV carrying just the 510 stick batts and usb cables separately? I'd really love to get my hands on a couple for these T4s.
Any chance of GV carrying just the 510 stick batts and usb cables separately? I'd really love to get my hands on a couple for these T4s.
I really, really love this little baby. I have 3 of them right now. The first one has been going for about a week and has seen 50 State Salute (70/30) @ 4ml, Hazelnut Coffee (75/25) @ 3ml, Buttery Nipple (75/25) @ 2ml, and currently Pumpkin Pie (50/50) @ 2.5ml (so far). Rinsed a couple of times in hot water, swirled in vodka for about 2-3min, another hot water rinse, blow out, then let it air dry in front of a small heater for about 1-2hrs. After that, I did a short dry burn and refilled. Vapes beautifully with no leftover flavor from the previous juice. Love it! Currently have them filled with Pumpkin Pie, Key Lime Pie, and a Vanilla Coffee. I find the flavor comparable, if not a bit better than, my mini Vivi Nova.
Any chance of GV carrying just the 510 stick batts and usb cables separately? I'd really love to get my hands on a couple for these T4s.
They will be getting these in soon and I would think they would work - correct me if I am wrong anyone
1 510 t PCC, AIO innokin kit in black!
Wasn't sure about these when I first saw them, but that setup with the pen cap looks brilliant.
They do not have them in stock but I think it is crazy that you can only get a Kanger T4 from Gotvapes.com or china
These look really sweet and have good reviews and I am sick of my vision ce4's
These look really sweet and have good reviews and I am sick of my vision ce4's
I have some questions for those who have tried these T4s and say they are very good.
How would these compare to the G5 clearomizer? I don't know who makes the G5 but it looks pretty darn similar. Are the T4s better quality than the G5s?
Did you do anything to it before vaping? Or did you just fill and vape at your normal voltage?
The reason I ask is because since GotVapes is out, I went to my local store and bought some G5s. The first two I filled with 80PG/20VG liquid, waited about 10 minutes then started to vape. I got nothing but burnt hits, even at the lowest voltage on my twist. The next two I rinsed with water and did a little bit of a burn, then rinsed again. They seem to be working ok, but I wondered if anyone using the T4s had to clean first before using.
Lastly, do you clean these the same way you would a CE3? Rinse, dry burn til you see the coil glow, rinse, then fill and vape. At least that's my method of cleaning a CE3.
Thanks.
How would these compare to the G5 clearomizer? I don't know who makes the G5 but it looks pretty darn similar. Are the T4s better quality than the G5s?
Did you do anything to it before vaping? Or did you just fill and vape at your normal voltage?
The reason I ask is because since GotVapes is out, I went to my local store and bought some G5s. The first two I filled with 80PG/20VG liquid, waited about 10 minutes then started to vape. I got nothing but burnt hits, even at the lowest voltage on my twist. The next two I rinsed with water and did a little bit of a burn, then rinsed again. They seem to be working ok, but I wondered if anyone using the T4s had to clean first before using.
Lastly, do you clean these the same way you would a CE3? Rinse, dry burn til you see the coil glow, rinse, then fill and vape. At least that's my method of cleaning a CE3.
Thanks.
I did nothing to mine, just filled, waited a bit and am still vaping on the same unit right now. I am using 510 stick batteries @ 3.3volts
As for cleaning it, rinse it with hot water a few times, do a couple of dry burns to get most of the water out, let it sit for 5 or 10 minutes, fill and use again. Don't get really over zealous with it, it's a tiny little coil.
As for cleaning it, rinse it with hot water a few times, do a couple of dry burns to get most of the water out, let it sit for 5 or 10 minutes, fill and use again. Don't get really over zealous with it, it's a tiny little coil.
The T4 works fine from 3.2V and up. Been having no problems even with unregulated bats that start off at 4.2V. Never had a single dry hit, but that will certainly depend on the e-liquid used, as with all devices.
Just fill them and go. They are fast wickers.
Still the best of the small clearos I've tried. Waiting to try/find out if the vision nanos are any good also.
Just fill them and go. They are fast wickers.
Still the best of the small clearos I've tried. Waiting to try/find out if the vision nanos are any good also.
- Status
Similar threads
- Locked
- Locked
