Hi I just bought a ipv mini that is a 30 watt device and I bought a 18650 battery with it and a peakomizer v2. I put the watts all the way up to 30 and it only goes up to 3.9 volts but on the box it says it's soppost to go up to 8 volts. How to I raise the voltage on it? Can I only go up to 3.9 volts on my atomizer? I have a .5 ohm coil btw.
Ipv mini only goes up to 3.9 volts?
- Thread starter Jzdude
- Start date
- th_trl_thread_readers 0
- Status
the voltage is dependent on the ohms you are running, and it will go higher depending on that for a max of 30 watts, just like it will max at 8 volts even if not at 30 watts depending on the ohms.
Your at the limit it can do 30 watts OR 8 volts not both at the same time, if you switch to voltage it will go up until you hit 30 watts. If you want to get more you need to raise the resistance
3.9 volts will hit your wattage limit with a 0.5 ohm coil.
(3.9 volts x 3.9 volts) divided by 0.5 ohms = 30.42 watts
This is why your ipv mini will not let you turn the voltage any higher.
Your mod has the following limitations:
8V Max
30W Max
You cannot select a Voltage setting that will result in a higher Wattage than the mod will allow.
You cannot select a Wattage setting that will result in a higher Voltage than the mod will allow.
Wattage = Volts times Volts divided by Ohm
8V Max
30W Max
You cannot select a Voltage setting that will result in a higher Wattage than the mod will allow.
You cannot select a Wattage setting that will result in a higher Voltage than the mod will allow.
Wattage = Volts times Volts divided by Ohm
Hi Jzdude and welcome to ECF!
A coil that will go to 30 watts AND 8 volts would be a 2.13 ohm coil.
Here's a link that might help:
Vaping Battery Safety & Ohms Law Illustrated and explained in very simple terms
Hope it helps and Happy Vaping!
- Status
Similar threads
- Locked
