IPV2S hits awesome

[KiLLeRr KeN]

So i've been using a copper mech mod with a mutation x .74ohm build dual coil. and it gives me a cool vape on my mech mod.

FF to today where I just recieved my ipv2s and at 4.2V it gives me a nice warm vape. I wonder if it was the voltage drop of the mech that did it or what? But i do love regulated mods now :]

 

[Necrotic]

Voltage drop probably. Most mechs have about a .15-.25 voltage drop on that kind of load.

 

[KiLLeRr KeN]

I think I will forever be one to run regulated setups and have a mech as a backup lol

 

[Necrotic]

Regulation is nice. OnlY downside to the ipv1, 2 and 2s is the battery sag. Buddies battery would sag halfway down when firing. I love my sigelei 100w

 

[KiLLeRr KeN]

I just noticed that after you said it. It would jump from full batt to lower when I press the fire button, I will see how long my battery last today

 

[Necrotic]

I just noticed that after you said it. It would jump from full batt to lower when I press the fire button, I will see how long my battery last today

Using the mutation x on it?

 

[KiLLeRr KeN]

yes indeed. I might end up using a 454 big block tomrorow with a different setup inside but not sure yet since I love my mutation x lol

 

[Necrotic]

The mutation x really works at 75 watts. Nice fog but not very dense like the dark horse

 

[MrPlink]

I think I will forever be one to run regulated setups and have a mech as a backup lol

Smart move. Once you go high power regulated it is hard to turn back.
My mechs aren't going anywhere because of their sheer reliability but it's tough to argue with a consistent hit time after time.

 

[KiLLeRr KeN]

So far I'm hovering at 24.8w on a .74ohm build... I want to try spaced coil on my 454 and see how long it lasts and see the flavor output.

 

[Necrotic]

So far I'm hovering at 24.8w on a .74ohm build... I want to try spaced coil on my 454 and see how long it lasts and see the flavor output.

BumP that wattage up

 

[KiLLeRr KeN]

I kinda like the warm vape at 25w. I bumped it 30/35/40 and it quicky gets dry after a few pulls lol. They get warmer everytime too which is great. I'm using a dark juice so I wonder if that's a reason it gets dry faster, I kinda noticed that from when I switched from a clear to dark juice before.

 

[Jazzman]

Smart move. Once you go high power regulated it is hard to turn back.
My mechs aren't going anywhere because of their sheer reliability but it's tough to argue with a consistent hit time after time.

I sooo agree with this Plink. Many of my mech totin' friends just don't get the beauty of a regulated, consistent vape hit after hit until the battery is gone. Hey, it's their vape and their welcome to do it however they like, but 2014 has become the year of the regulated vape to me.

 

[Trailz]

Got the 2S last week, first mod up from the istick. Paired it with the Atlantis @ 30W and life is good.

 

[KiLLeRr KeN]

Anyone by chance know what input is needed for the charge port on this device? IE: Volts and Amps

 

[Trailz]

Charge mine using a Monoprice premium microUSB cable and a USB charger capable of 1.5A. Don't know off the top of my head what the input values are for this device, should be able to find it under the product description on one of the vendor sites.

 

[KiLLeRr KeN]

Mine is a 2A and 5V output, So I know it'll charge the battery fast, but I don't know if the on board charger does it's own thing or what.

 

[rustafar]

I use both a 5 volt, 500mA usb wall plug or my old Samsung phone wall plug @ 5.1 volt, 0.7 amp or just the usb for computer.
Not sure which one charges faster.

 

[KiLLeRr KeN]

So for my personal use, I need to charge my battery at lunch or it will not last me all day.. I drip a lot haha, which is why I want to try a tank lol

 

[Trailz]

I was concerned about the runtime with my Atlantis/IPV 2S/LG HE2 setup. Looks like its right where it should be: