IPV8 230W TC First Look

[Gallant]

Specifications:

• Runs on by YiHi SX330-F8 chip
• Dual 18650
• Output Power: 10-230W
• Output Joule: 10-120J
• Standard Resistance: 0.15-3.0ohm
• Joules Mode resistance: 0.05-1.5ohm
• TCR Value: 0.00050-0.00700
• Input Voltage: 6-9V
• Output Voltage: 1-7V
• Temp. Limit Centigrade: 100℃-300℃
• Temp. Limit Fahrenheit: 212℉-572℉
• Directly charging

• 
  

 

[Eskie]

I guess they decided to go with lucky number 8 rather than 7 this time around and hope it brings them more luck than they've been having with the last few releases.

 

[mjag]

This new design is just meh, the black velvet is only missing a painting of Elvis.......lint magnet....no thanks.

Sent from my SM-N910P using Tapatalk

 

[Hendog24]

I really like the red one.

Sent from my SM-N910P using Tapatalk

 

[LilWhiteClouder]

I really like the red one.

Sent from my SM-N910P using Tapatalk

I just preordered the "Cracking Paint" black/red one from fasttech. Says ETA (to fasttech) is my b-day (11/25) Happy Birthday to me Also picked up the Dagger 80w with extra cool doors
I really like the look of this thing. Hated how the 6 looked. When I read the description, it said it supports Ni, Ti and SS 304, but no mention of 316 or the like? Im thinking they just didn't include the various types o SS

 

[greenmachine17]

Specifications:

• Runs on by YiHi SX330-F8 chip
• Dual 18650
• Output Power: 10-230W
• Output Joule: 10-120J
• Standard Resistance: 0.15-3.0ohm
• Joules Mode resistance: 0.05-1.5ohm
• TCR Value: 0.00050-0.00700
• Input Voltage: 6-9V
• Output Voltage: 1-7V
• Temp. Limit Centigrade: 100℃-300℃
• Temp. Limit Fahrenheit: 212℉-572℉
• Directly charging

• 
  

Hi.quick question. I'm using the freemax Scylla with nickel coils. All of a sudden "no liquid dry" pops up on display . But this works on my other devices. Plus my crown 2 works on the ipv8. I've changed out the coils and it still reads no liquid. I would appreciate any insight. thank you

 

[AtmizrOpin]

Hi.quick question. I'm using the freemax Scylla with nickel coils. All of a sudden "no liquid dry" pops up on display . But this works on my other devices. Plus my crown 2 works on the ipv8. I've changed out the coils and it still reads no liquid. I would appreciate any insight. thank you

what is you set temp and joules? also, what is the base resistance when you set it? will the mod fire the tank if slightly unscrewed from the mod.

 

[greenmachine17]

what is you set temp and joules? also, what is the base resistance when you set it? will the mod fire the tank if slightly unscrewed from the mod.

50-55j- .147-15-.16 resistance 517°
& yes. It fires w tank a ltitle loose..510 pin has slot. Maybe if I turn a hair to raise it ? Mod Pin/threads not dirty

 

[AtmizrOpin]

no, do not turn that 510 pin!!!!!! P4U should delete that friggin slot from the 510 center pin. IT DOES NOT RAISE OR LOWER USING A SCREWDRIVER. YOU WILL BREAK THE WIRE GOING TO IT IF YOU PUT A SCREWDRIVER TO THAT 510 PIN! sorry for yelling but i don't want to see you break your mod.

it's most likely the tank is not compatible with the mod. the 510 pos pin is most likely pushing too hard or not hard enough on the 510 pin of your atty, creating a short or a very high resistance. that's the problem when using most of these prebuilt TC coiled tanks (floating 510 pin between coil and 510 on the mod makes for a crap connection). same problem plagued the subtank series tanks when kanger came out with their Ni200 coils.

 

[sonicbomb]

230 Watts on two 18650s, good luck with that.

 

[greenmachine17]

Just had to clean mod connection & 510 a little more. Pushed the connection in mod up&down a few times more pointed the threads w wood stylus & scraped the surfaces .. did the same w the 510 pin.
Just using a paper towel wasn't enough. Plus the scylla is my everyday tank,easy fill,great flavor.

Thx all for ur help..btw..50j. Don't go anywhere near 200w..lol..