Issues with MVP2

[WakeUpDead]

Yes lift the center pin, however be very careful with the MVP threads, after 8 months of use my MVP's threads are gone, I cant use any 510 tanks or attys only Ego style outer threads.

I am shipping my MVP out tomorrow to have a better made 510 installed, this time installed flush with the top of the MVP, I cant wait to get my MVP fixed!

Good luck and be easy on those MVP threads.

 

[wedoitall]

Where are you getting yours fixed at? Don't need it ATM but for future reference


Sent from my iPhone using Tapatalk

 

[Caridwen]

Lots of info in this thread-
http://www.e-cigarette-forum.com/fo...e-mvp-v2-owners-group-compiled-list-tips.html

Might look a little funny but you could try an adapter.

 

[bcme]

Lots of info in this thread-
http://www.e-cigarette-forum.com/fo...e-mvp-v2-owners-group-compiled-list-tips.html

Might look a little funny but you could try an adapter.

I have the same problem with some of my T3s's and MT3's. They all work using an adapter.

 

[Yohkos]

Hi, I have the same problems with some tanks working and some not on the MVP. I just took someone's suggestion and took a piece of sandpaper on hard service and moved the tip on the mvp across the sandpaper back and forth and sanded the indents for the airflow a little and seems to be working now. It took just a few minutes to file down. Hopefully this will do the trick. Hope this helps.

 

[nancybout]

Pull down the pin I has same problem I used an earring and pulled it down. The center pin on the tank because the MVP has it lower so the atty has to be pulled down center pin


Sent from my iPhone using Tapatalk

 

[nancybout]

Ok I hope that made sense lmao


Sent from my iPhone using Tapatalk