It made it! It's finally here!

Status
Not open for further replies.

ClasslessKing

Senior Member
ECF Veteran
Verified Member
Through a little bit of poking, prodding, and shoving the USPS (and some hard hoping), My FT order finally made it to my doorstep today, and I have to say, I'm absolutely, positively in love. When I first started out on my vaping experience, I wasn't so sure when it came to mech mods. I wasn't sure that it was something that I would want or even need. I just wanted something at the time that would sate my cravings for nicotine and get me off cigarettes. Now that I've had a chance to use my Nemesis and kayfun Lite clones, I'm extremely satisfied. I am using the stock coil that came built in it (Measured out to about 1.3 ohms), and already, I'm experiencing more flavor, more vapor and generally a higher quality vape then I have in the past and I have every single one of you to thank for this. So as much as this is thread saying that I'm happy my package is here, I want to personally thank anyone and everyone here at ECF for all of the information that I've gotten since I started here. I try to soak up as much as I can about everything (Even topics that I don't think I'll ever use), and you all have been more than helpful, more than friendly, and definitely more than hilarious on one occasion:vapor:. I've been a member of several forums for several different things in my life, but I have to say, this community continues to surprise me. Thanks again everyone for getting me going and keeping me off cigarettes for, as of today, marks 3 months.
 

ClasslessKing

Senior Member
ECF Veteran
Verified Member
azesaze8.jpg
sweetie with the Kayfun Lite on it (looking for a quartz tank for it and KidneyPunchers options say that they don't fit KFL on either the nano or the full size, any experience folks?)

ehasanav.jpg
sweetie with the Patriot on it.

Both had coils installed (and will stay that way until I get paid. The patriot had a 1.0 dual coil on it and the KFL had a 1.3 single coil on it) and I love them both equally, but this Kayfun is blowing my mind.

And for all those in the FT thread that put up with my whining about my order, thank you so much.

Every time I looked at the tracker, I was like in The Mummy with Brendan Fraser "Patience is a virtue..."

"Not right now it's not..."
 

ScandaLeX

ECF Guru
ECF Veteran
Verified Member
Aug 6, 2013
12,893
58,154
PhiLLy
KAYFUN QUARTZ GLASS ~ This is where I bought mine & it fits extremely well. Currently you'll see it listed for $99. IGNORE THAT!! It's listed like that to make people read. Reg. price is $23.95 & it'll go back to that price when he has more in stock- if you decide to hold out & wait.

azesaze8.jpg
sweetie with the Kayfun Lite on it (looking for a quartz tank for it and KidneyPunchers options say that they don't fit KFL on either the nano or the full size, any experience folks?)

ehasanav.jpg
sweetie with the Patriot on it.

Both had coils installed (and will stay that way until I get paid. The patriot had a 1.0 dual coil on it and the KFL had a 1.3 single coil on it) and I love them both equally, but this Kayfun is blowing my mind.

And for all those in the FT thread that put up with my whining about my order, thank you so much.

Every time I looked at the tracker, I was like in The Mummy with Brendan Fraser "Patience is a virtue..."

"Not right now it's not..."
 

Tinkiegrrl

Vaping Master
ECF Veteran
Verified Member
Nov 18, 2013
3,013
3,480
New York, NY
Congrats on three months and your first mech mod OP! If you think the Kayfun is good now, just wait until you've got a micro coil with cotton wicking in that thing. Absolutely amazing! I'm currently waiting on a black Kayfun clone from Ehpro, and a black copper Stingray. Already this week I got two more Provari's from the classies. A black full size for my husband, and since he didn't mind the size and decided to love it and keep it (this wasn't part of the plan damn it) I wound up ordering a third Provari. After all, I need back up for the first, right? Nevermind the MVP I already have. That's back up for the back up, and the Stingray is just for play. Yep. I absolutely have a NEED for all these devices.
 

Tinkiegrrl

Vaping Master
ECF Veteran
Verified Member
Nov 18, 2013
3,013
3,480
New York, NY
Oh and OP? There are a couple of Rainbow Heaven quartz tanks for te Kayfun over on eBay. Pay close attention to the positive feedback of the seller and you should do fine there. My first arrived cracked, but sellers rely on positive feedback so much that they immediately sent a replacement without questions or a request to send the cracked item back. I imagine that a lot of people take advantage of this unfortunately, but I do feel safe buying from there, and if you look carefully you can find great deals.
 

ClasslessKing

Senior Member
ECF Veteran
Verified Member
Congrats on three months and your first mech mod OP! If you think the Kayfun is good now, just wait until you've got a micro coil with cotton wicking in that thing. Absolutely amazing! I'm currently waiting on a black Kayfun clone from Ehpro, and a black copper Stingray. Already this week I got two more Provari's from the classies. A black full size for my husband, and since he didn't mind the size and decided to love it and keep it (this wasn't part of the plan damn it) I wound up ordering a third Provari. After all, I need back up for the first, right? Nevermind the MVP I already have. That's back up for the back up, and the Stingray is just for play. Yep. I absolutely have a NEED for all these devices.

Oh for sure! You absolutely need them. I've already got shiny-itis for a Hades. Curse you interwebs! But yeah, I think I'll bop around eBay for that quartz tank. I'm liking that kidney puncher one, and if it goes wrong, I'm sure I can return it and get a big Ol spool of Kanthal! Those Rainbow Heaven ones are sure nice though. I'm a mint flavor junkie at heart and would love to ice out my lungs with that Kayfun. Oh, and as a side note, I put a cinnamon juice called napalm on my Patriot last night... Um... Yeah... That was intense.
 
Status
Not open for further replies.

Users who are viewing this thread