itaste mvp2 on aga t7

[bigjsivs4427]

I recently won an aga t7 I have an mvp2 when I build a coil I've tried anywhere from 6-10 wraps my green light just stays on and it won't fire any help would be appreciated

 

[Saltraker]

What resistance are you running at? The MVP2 will fire to down around 1 ohm or so. It also could be that the 510 pin on the MVP needs to be pried up to make contact with the connection on the atty. What is the error message on the MVP?

 

[Inception]

I've gotten my mvp down to .8 and that's it. Any lower and I get a non. Try for 7 wraps

 

[zepmansam]

Try a finer guage of kanthal.

 

[Warpigs]

Welcome to ECF!

 

[bigjsivs4427]

What resistance are you running at? The MVP2 will fire to down around 1 ohm or so. It also could be that the 510 pin on the MVP needs to be pried up to make contact with the connection on the atty. What is the error message on the MVP?

When I build it as a single coil at 12 wraps it fires and says it's at 1.4 ohms when I add the second coil built the same way it drops to .6 and won't fire

 

[bigjsivs4427]

I'll do that 7 on both coils?