JOYETECH EGO ONE CLR compatibility

[aalmosawi]

I am wanting to order this and some cotton + wire.

few questions;

first of; i am planning to use this on the vaporesso tank. thats the only tank i have. i have ordered some ccells but i am sure they'll finish fast SO....

i figured i'd get the Ego one CLR which i assume will fit on the vaporesso tank?

should i order the 0.5 or 1.0? (5pack)

is it best to order with it kanthal or nickel wire or SS?

for some reason the wire comes in small packs of 5, 10 or max of 30ft. thats too little.

is there anything else i need to order for this combination?

 

[steam heat]

I don't quite understand your question... But I would doubt a joyeteck ego one coil will fit in a tank from a different manufacturer...(I could be wrong) but just so you know kanthal is for watts and nickel is for temp control.... You may wanna do a Lil more home work before you start building coils so that you know how to go about it safely,bad build can be unsafe for the user and the device it's self....

 

[suprtrkr]

I do not believe the Joyetech coils will fit the Vaporesso tank. That tank uses the new ceramic coils. The tank should fit on the battery. I have no idea how well it will work, I think it is intended for a variable wattage device, which the eGo One is not. Either coil value would work on the eGo one; a 1 ohm coil will produce less and cooler vapor than a .5 ohm coil (I repeat I don't think the CL heads will fit in the tank and aren't usable.) If you are going to use the eGo One battery, Kanthal coils only. The Ni200 coils are for Temp Control, which the eGo One does not do. I don't understand your question about the wire lengths. What wire? If your tank uses pre-made coils, you don't need any wire. If you're set on using the eGo One, I think I would order the matching tank that goes with it, in which the CL coils will fit and are designed to operate.

 

[steam heat]

Also if you are taking about using the ego one battery, know that it is 20mm.......I believe that vaporesso tank is 22mm. The ego one does work in temp mode with the ni and ti coils(temp not adjustable) provided with the starter kit. I bought this mod for my chick she did not like it and quickly moved on to a new mod

 

[Grimwald]

As far as I know the clr coils will only work on the ego one mini/maxi/mega, or the wismec amor tank, or the egrip cl oled. I use that coil on all of the above, but I've never found any other tanks that use it.

As for battery size the ego one mini/maxi are 19mm and the mega is 22mm.

 

[aalmosawi]

I don't understand your question about the wire lengths. What wire? If your tank uses pre-made coils, you don't need any wire. If you're set on using the eGo One, I think I would order the matching tank that goes with it, in which the CL coils will fit and are designed to operate.

the online stores i order from, and frankly my order is only via vaporDNA, only have small length wire. never exceeding a 5-10ft or so in roll size..

anywho. this whole thing is getting me in a doozy.
as i have stated time and again i am limited in supply so as you can see i am trying my best to make a backup option for when my Vaporesso coils run out. This is when the idea of using the eGo CLR popped in my head. But as you guys pointed out this wont do. I'd need an eGo tank (more purchasing) AND another modbox to fit the tank on.

I think that an RDA, something like the Mutation Xs ($16.00) will be ok on the Vaporesso mod?
and with that i can order a few strip of coil head. I am thinking nickel rolls ... but as i said the online stores dont offer much more than 5ft. i mean look at this: PURE NICKEL NI200 NON-RESISTANCE WIRES (5 FEET). Why on earth is there nothing more than 5ft? thats too little.
When i asked for a list of items to order for an oversees trip i was told to get 100ft of wire. jees. so the 5ft is at $3.50. Ya. thats too expensive no matter how you put it. nevertheless i'll order 4 rolls?

then i'd need cotton. an RDA i've already decided on the Xs.
I got the jiggler, UD Coil Jig.

What else? an Omhmeter? cant i just use the mod for this?

 

[Izan]

Hi and welcomes,
Deep breath...
The "vaporesso" coils should last a month each.. so...how many do you have?
The Mod can and will power any 510/Ego compatable topper.
Many vendors sell wire, most in larger rolls...you are not compelled to use the site you linked.

Buy more Vaporesso coils or since they are "sideways Compatible", coils that will fit (non ceramic) or perhaps a compatible RBA.
Triton 2 coils and RBA for example.

Cheers
I

 

[aalmosawi]

Hi and welcomes,
Deep breath...
The "vaporesso" coils should last a month each.. so...how many do you have?
The Mod can and will power any 510/Ego compatable topper.
Many vendors sell wire, most in larger rolls...you are not compelled to use the site you linked.

Buy more Vaporesso coils or since they are "sideways Compatible", coils that will fit (non ceramic) or perhaps a compatible RBA.
Triton 2 coils and RBA for example.

Cheers
I

interesting. whats wrong with the mutation xs rba/rda tank? its cheap.

i'll seek out another site that sells more coil. i am sticking with nickel for the moment. since its best for TC and the vaporesso tank is that.

 

[Izan]

interesting. whats wrong with the mutation xs rba/rda tank? its cheap.

i'll seek out another site that sells more coil. i am sticking with nickel for the moment. since its best for TC and the vaporesso tank is that.

Nothing wrong with the Mutation.. except (imo) it is over your skill and experience level.

LEARN to use the device you have PROPERLY.
Spend some time on You tube and googleing round.
What temp/watts do you prefer?
What flavour juice are you using?
What strength?
Is the Vaporesso kit your first try at quitting smoking or have you tried other devices/units in the past?


Cheers
I

 

[Katya]

i figured i'd get the Ego one CLR which i assume will fit on the vaporesso tank?

Nope. They won't fit.

But Eleaf ECR rebuildable coils will fit--I have one of those (1Ω) in my Vaporesso tank right now:

Rocky Mountain Vapor has the best price ($2.50 apiece) and 25% off NOVEMBER coupon code. Free shipping on orders $14 and up.

Eleaf ECR heads for Melo 2/iJust 2 - $2.50 : Rocky Mountain Vapor, The Mountain top of Electronic Cigarettes

 

[aalmosawi]

Nothing wrong with the Mutation.. except (imo) it is over your skill and experience level.

LEARN to use the device you have PROPERLY.
Spend some time on You tube and googleing round.
What temp/watts do you prefer?
What flavour juice are you using?
What strength?
Is the Vaporesso kit your first try at quitting smoking or have you tried other devices/units in the past?


Cheers
I

i am looking at a review of the triton 2 right now but i am running into an issue. the coils. i am trying to stray away from the coils when my vaporesso finishes (the coils).

i think its best for me and since i am gonna wanna do it sooner or later is just to learn driping the hard way. we all gotta learn some time.

nice find on the ecr head by eleaf, Katya.
the tank, ELEAF IJUST 2 TC TANK comes with two. one installed and a spare. $14.99. not sure if the coils that come with the tank are ECR or not.

 

[suprtrkr]

the online stores i order from, and frankly my order is only via vaporDNA, only have small length wire. never exceeding a 5-10ft or so in roll size..

anywho. this whole thing is getting me in a doozy.
as i have stated time and again i am limited in supply so as you can see i am trying my best to make a backup option for when my Vaporesso coils run out. This is when the idea of using the eGo CLR popped in my head. But as you guys pointed out this wont do. I'd need an eGo tank (more purchasing) AND another modbox to fit the tank on.

I think that an RDA, something like the Mutation Xs ($16.00) will be ok on the Vaporesso mod?
and with that i can order a few strip of coil head. I am thinking nickel rolls ... but as i said the online stores dont offer much more than 5ft. i mean look at this: PURE NICKEL NI200 NON-RESISTANCE WIRES (5 FEET). Why on earth is there nothing more than 5ft? thats too little.
When i asked for a list of items to order for an oversees trip i was told to get 100ft of wire. jees. so the 5ft is at $3.50. Ya. thats too expensive no matter how you put it. nevertheless i'll order 4 rolls?

then i'd need cotton. an RDA i've already decided on the Xs.
I got the jiggler, UD Coil Jig.

What else? an Omhmeter? cant i just use the mod for this?

Those Vaporesso coils are supposed to be lasting 3-6 weeks each, from what I'm reading. The Mutation drippers-- any of them, there's a bunch of different models-- will work just fine. They sell short rolls of wire because they're gouging you for the money and because it lasts a long time. a pair of small coils only takes half a foot of wire to make and you ought to get a month or two out of them, minimum, so long as you don't break them re-wicking. You're also looking in the wrong places for wire. I told you to get 100 foot rolls because that's what I buy. It's a lot cheaper per foot that way. But I get them on eBay, as I also told you. You can use the mod for it. It's not as easy, or as safe, but it can be done.