Sometimes I get a tight drag, no vapor right after changing a cart. I just pull it out and push it back in and then it seems to work fine.
- Status
Sometimes I get a tight drag, no vapor right after changing a cart. I just pull it out and push it back in and then it seems to work fine.
I picked up a few of these bottles with plastic needle-nose tips from Cignot (https://www.cignot.com/product_p/msc-drp-bot.htm).
They work great on the eRoll tanks. Also, they have a standard, child-proof (push and turn) cap like regular bottles and the cap fully covers the tip, so they are quite pocket friendly.
I actually do this every time by default. It's because you get air bubbles trapped down at the spike.
That is probably not a good idea. Doing that will cause fluid to come out of the tank which can leak out or into the battery, or flood the atty. Try in inserting a full tank onto a spare atty. You will see how much liquid actually comes out. I install the tanks with the air bubble at the tank opening. Once the tank is on turn the unit around, flick or shake until the air bubble moves to the mouth end of the tank.
I do both, but FWIW, I haven't had any issue pulling it out a little first. Sometimes you'll get a stubborn bubble that just lets loose that much easier if you break the seal a tad first.
jingai:9139351 said:
Honestly, for me, the just work and don't leak. I typically completely fill the tank an sometimes over fill and have not had leak issues at all.
For me they seem pretty foolproof, so it id strange to hear others having issues.
I can only guess that there must be some bad units out there.
To be clear, with the exception of my original PCC that didn't have the grooves, I haven't had any leaks either. I was just referring to getting any bubbles away from the spike, which I think is unavoidable, but is simple to work around (shake and/or loosen seal).
jingai:9139797 said:
Yeah. I was just adding my comment with yours cause it sounds like we both aren't having issues
After using the alcohol method to clean out a gunked up battery, it came back to life. I've been filling carts up about 4/5ths of the way now and have had no issues since with liquid build up inside the cone. If you overfill, liquid builds up in the cone and slides through to the battery connection and gunks it up.
Looking for a good price on a kit. Any ideas? I know exhale vapors is out of stock.
Sent from my EVO using Tapatalk 2
Sent from my EVO using Tapatalk 2
JOYE eRoll Starter Kit - $60.00 : Rocky Mountain Vapor, The Mountain top of Electronic Cigarettes
He includes a 2nd atomizer cone cover in his kits, so you would have 2 whole e-cigs. It's been awhile, but coupon code 20rocky got 20% off when I ordered mine at the end of February.
I used the 20% off coupon recently - *very* happy with RMV.
The day got away from me and i haven't really messed with the silver battery today - totally forgot about it until right now. Had the tank that was on it on my black one. Looked closer at it earlier today, pretty sure that tank was faulty. Will put a new atty and tank on the silver one maybe tomorrow. Have never had a problem with the black one getting too hot to touch. When the drag is too tight it just tap it a hard surface and it's fine - no problems with significant leaks until this other one. No firing in the charger since I started cleaning out the cone more frequently with a qtip.
The day got away from me and i haven't really messed with the silver battery today - totally forgot about it until right now. Had the tank that was on it on my black one. Looked closer at it earlier today, pretty sure that tank was faulty. Will put a new atty and tank on the silver one maybe tomorrow. Have never had a problem with the black one getting too hot to touch. When the drag is too tight it just tap it a hard surface and it's fine - no problems with significant leaks until this other one. No firing in the charger since I started cleaning out the cone more frequently with a qtip.
People say you can't chain vape with the eRoll. But if you have two fully assembled eRolls why cant you? Battery lasts 30 minutes. And charging takes 30 minutes. By the time you finish one battery, the other is charged.
Something wrong with my logic ?
Something wrong with my logic ?
I always clean out the cone between tankfuls....
do it on my eGo-c's too.
Only one I ever had a leak with is one I did not fully insert into the cone on the spike.
I could also see where the little air bubble could hold back the liquid though.
On a separate note...
I have like ten type B, LR attys for my eGo-c
since january, I have only used 4...and I have three Cs going all the time.
So, on saturday- i burned up a second atty...my fault- cooked it on my eVic---running HOT !
Two dead attys...? Could they be rebuilt ???
So, I did. Tiny, small parts- some 28g Kathal and like 3/8" of wick and 45 minutes latter, tested the coils- 1.8 and 2.1 ohms.
They worked...really, they worked well ! Not LR anymore...but thats ok.
Ego attys can be rebuilt.
do it on my eGo-c's too.
Only one I ever had a leak with is one I did not fully insert into the cone on the spike.
I could also see where the little air bubble could hold back the liquid though.
On a separate note...
I have like ten type B, LR attys for my eGo-c
since january, I have only used 4...and I have three Cs going all the time.
So, on saturday- i burned up a second atty...my fault- cooked it on my eVic---running HOT !
Two dead attys...? Could they be rebuilt ???
So, I did. Tiny, small parts- some 28g Kathal and like 3/8" of wick and 45 minutes latter, tested the coils- 1.8 and 2.1 ohms.
They worked...really, they worked well ! Not LR anymore...but thats ok.
Ego attys can be rebuilt.
Nothing wrong with that.
The eRoll does give a nice full vapor...so I dont see why you couldnt.
I also recommend RMV for the eRoll. The extra cone they give is good bonus, and I got the 20% off too a couple of weeks ago.
Last edited:
If anyone here tried a Vision Nano with a 510 battery, can they compare its performance to a eRoll in terms of VTF? Thanks!
Bummer, they only ship to U.S. addresses. Shipping & Returns : Rocky Mountain Vapor, The Mountain top of Electronic Cigarettes
goodprophets is more expensive, but they ship to Canada. litecig sells it, but their site says to create an account to find out if they ship to Canada. You could probably do a test order and get to the shipping cost page. Hope that helps.
i can get it locally here for $60 and pick it up. at $48 it was a steal!
- Status
Similar threads
