Jugheads

[sweetmeat]

I theriously need thum help....bad case of thedish pastry tongue. Iths all good, can't get enough.
It's time for more soon. Who has tried the Blueberry? AND what's your vote on the best vg with a cuppa coffee?

The blueberry thrill is delicious, especially mixed with vanilla been! Unfortunately I think the vanilla has been discontinued, I'm going to have to try one of his other vanillas to see if they're comparable.

 

[therealcmac]

The blueberry thrill is delicious, especially mixed with vanilla been! Unfortunately I think the vanilla has been discontinued, I'm going to have to try one of his other vanillas to see if they're comparable.

Sweetmeat, you have the best name ever.

 

[X P3 Flight Engineer]

Thanks to the generosity of FisherPal I have been able to sample some of Juggy's best (with an atty as well. What a difference dripping makes!). I finally got to try Joke Smoke (1 & 2). They are not my favorite but they are great to throw in for a change up on flavor. I love Minty Chip Kookee!

Thanks again FisherPal. I will pay this forward soon and pass along the good karma!

I am Relaxing and Enjoying!

 

[bornagainst]

Fisherpal = good peoples.

 

[WolfeReign]

Just got the Jugz'O'Matic Pistol Grip mod and love it, even got a star dust and cone on there, and have it working with some 16340 AW's, and trust fire's....though the include vision clearo's suck at 6V on the pistol grip. I am thinking it is due to the fact that you need to use the included batteries for that As the vision clearo's on the saber touch VV (which is being retired soon as the set that comes with the pistol grip are charged) at 6V rocks

Did a first impression review on it (and yes 8:39 a LR stardust dies, while 9:00 you can literally watch the coil in the V510 blow from being at 6V)
Normally i have a small intro going on, i forgot to add it)

 

[empress]

Anyone try @shtray tobac? What does it taste like?

 

[chagrin]

Just got the Jugz'O'Matic Pistol Grip mod and love it, even got a star dust and cone on there, and have it working with some 16340 AW's, and trust fire's....though the include vision clearo's suck at 6V on the pistol grip. I am thinking it is due to the fact that you need to use the included batteries for that As the vision clearo's on the saber touch VV (which is being retired soon as the set that comes with the pistol grip are charged) at 6V rocks

Did a first impression review on it (and yes 8:39 a LR stardust dies, while 9:00 you can literally watch the coil in the V510 blow from being at 6V)
Normally i have a small intro going on, i forgot to add it)

I think you said .com instead of .co in the video.

 

[therealcmac]

(and yes 8:39 a LR stardust dies, while 9:00 you can literally watch the coil in the V510 blow from being at 6V)
Normally i have a small intro going on, i forgot to add it)

I have to ask lol, why in the world did you put an LR SD and an LR V510 up to 6v???

 

[MisterMike]

I have to ask lol, why in the world did you put an LR SD and an LR V510 up to 6v???

I was curious about the same thing. Assuming a true 6v and 2.0 ohms, that's like 18 watts of burnination right there. I find half that to be too hot.

Looks like an interesting little mod though. Nice and ergonomic.

 

[FisherPal]

Thanks to the generosity of FisherPal I have been able to sample some of Juggy's best (with an atty as well. What a difference dripping makes!). I finally got to try Joke Smoke (1 & 2). They are not my favorite but they are great to throw in for a change up on flavor. I love Minty Chip Kookee!

Thanks again FisherPal. I will pay this forward soon and pass along the good karma!

I am Relaxing and Enjoying!

So glad you found 'The Joy of Dripping' It changes things right up, doesn't it? Glad you're liking at least a couple of those samples. Sorry there wasn't more of the Choco Mint Cookie ... I tried real hard to like that one, lol. But at least you know to order it now. Now to find a desperate soul who actually likes these freaking Stardusts! I've had it with them!

 

[X P3 Flight Engineer]

So glad you found 'The Joy of Dripping' It changes things right up, doesn't it? Glad you're liking at least a couple of those samples. Sorry there wasn't more of the Choco Mint Cookie ... I tried real hard to like that one, lol. But at least you know to order it now. Now to find a desperate soul who actually likes these freaking Stardusts! I've had it with them!

I have been trying everything under the sun to make the Star Dusts perform. The latest idea is when the draw tightens up I wet the wicks and then open the top to let air in and push the tip in without tightening it, or I screw it in and then back it off a half turn. It is only good for 1 or 2 draws before the wicks must be wet again and I tip it just enough to wet each wick without getting liquid in the center tube.

The tip must be tightened before I lay it down or put it in my pocket but at least I can get some use out of these things. PITA! I have tried all the tricks to get air in the bottom to loosen the draw but that doesn't seem to be where they need the air.

Any other ideas out there?

 

[WolfeReign]

I have to ask lol, why in the world did you put an LR SD and an LR V510 up to 6v???

umm this is me.....do you ~REALLY~ need to ask why?
Honestly i wanted to see just how far i could push the envelope....erm i mean you never know if a n00b would watch and i wanted to show them what NOT to do....yeah that's it

 

[WolfeReign]

I was curious about the same thing. Assuming a true 6v and 2.0 ohms, that's like 18 watts of burnination right there. I find half that to be too hot.

Looks like an interesting little mod though. Nice and ergonomic.

You know i did not notice the burning that bad......(yet i cannot handle hot sauce on food....or pepper go figure?), but it does fit really nice in the hands, and gives you that slick "hey i have a box mod" feeling.

Some people have been saying they cannot run boge's, kangers, star dusts or LED clearo's on it (at LOWER voltages), but i have not had one issue. The surface of it feels very similar to a black ego...pretty much the same "rubber-like" surface.

whatever you do: DO NOT use AW IMR 16340's in there.....WOOF! a LR kanger set at a nice safe 3.7V hits you like 7V.....(below is as per jug heads)

Comes with 2 protected 16340 900 mAh 3.7v batteries.

(Replacement Batts. or Spares are IMR 18350 800 mAh 3.7v)

*NOTE*(This Unit's Batts.are Side by Side,NOT Stacked !

When i emailed them last night about this, and shown a first impression video i got this back:

,Its not JUST Volts its ''PWM Volts'' & they kick very very hard!
the EVO is PWM also. be careful or you can fry alot of stuff fast!
This is part why these are so awesome!

Seriously though when compared to the saber touch VV? the saber is sitting on a shelf with the batts removed.....viva la pistol grip

 

[donnyc]

I have been trying everything under the sun to make the Star Dusts perform. The latest idea is when the draw tightens up I wet the wicks and then open the top to let air in and push the tip in without tightening it, or I screw it in and then back it off a half turn. It is only good for 1 or 2 draws before the wicks must be wet again and I tip it just enough to wet each wick without getting liquid in the center tube.

The tip must be tightened before I lay it down or put it in my pocket but at least I can get some use out of these things. PITA! I have tried all the tricks to get air in the bottom to loosen the draw but that doesn't seem to be where they need the air.

Any other ideas out there?

Try pulling the little nipple at the bottom where it connects to the batt out a bit that should give u more of a easy draw

 

[Battlelance]

I have been trying everything under the sun to make the Star Dusts perform. The latest idea is when the draw tightens up I wet the wicks and then open the top to let air in and push the tip in without tightening it, or I screw it in and then back it off a half turn. It is only good for 1 or 2 draws before the wicks must be wet again and I tip it just enough to wet each wick without getting liquid in the center tube.

The tip must be tightened before I lay it down or put it in my pocket but at least I can get some use out of these things. PITA! I have tried all the tricks to get air in the bottom to loosen the draw but that doesn't seem to be where they need the air.

Any other ideas out there?

Easiest way to get a lighter draw is to drill 7/16" holes along the bottom ring (I just use two), or just put them on a 510-510 adapter.

I'm assuming you're using these on a ego batt?

 

[Smile n' shine]

Well this just made my day! My SR Stardust works well enough with a reg ego batt, but I couldn't even get a draw on the twist. I noticed there are more threads on the twist battery which I suppose hinder air intake. I just tried an adapter and it works like a charm.

Easiest way to get a lighter draw is to drill 7/16" holes along the bottom ring (I just use two), or just put them on a 510-510 adapter.

I'm assuming you're using these on a ego batt?

 

[ChellyNelly]

I have been trying everything under the sun to make the Star Dusts perform. The latest idea is when the draw tightens up I wet the wicks and then open the top to let air in and push the tip in without tightening it, or I screw it in and then back it off a half turn. It is only good for 1 or 2 draws before the wicks must be wet again and I tip it just enough to wet each wick without getting liquid in the center tube.

The tip must be tightened before I lay it down or put it in my pocket but at least I can get some use out of these things. PITA! I have tried all the tricks to get air in the bottom to loosen the draw but that doesn't seem to be where they need the air.

Any other ideas out there?

Yeah I got an idea: buy something that works

 

[WolfeReign]

i am too busy doing surgery with rocket science as it where to offer a few things to help




now all kidding aside, what are you using for the battery? I am sure you have tried the ego to 510 adapter trick, but one thing i noticed that helps with tight draws is this:

~Pass through from Canvape
~Ego "C" shorty cone
~510 to ego adapter.
lemme walk you through this put the adapter on the pass through, shorty cone on the adapter and star dust on the adapter this will help with the tight draw. If this does NOT help, then at this point and time my friend you have a defective SD, always did and always will have see if you can get a new one

~this has been from the desk of Owner and Publisher of a new vape magazine soon to be released~

 

[Rttch]

Back on track here, Jugs has some new flavours out. YUM

 

[ChellyNelly]

What are they? I'm having a hard time telling.