Just got my eGo VV

[joelj]

Hi Guys,
this is the first vv model I'm going to use.
Its a SLB vv with 3amp limit and 3-6v range with 650mah battery.

I'm coupling it with T3 kanger clearomizer. which is 2.4-2.6 ohms in resistance.

Can anyone give me a good voltage settings for optimum flavor release?
I'm using apollo e-juice with PG/VG 60/40 mix.

Any help/input is highly apprecited

thanks

 

[ImThatGuy]

My target in all of my juices have been around 8.0+-0.5watts. With the ohms of 2.4-2.6 my voltage would be around 4.4 or so...Start on low and increase the voltage to find that sweet spot.

 

[beckyblue]

I'll say that you'll also want a second of those batteries because, especially cranked up like that, you'll blow through a 650 mah pretty darn quick. Around 4.1v for me at those ohms. Enjoy!

 

[Mitey F]

About 4 sounds like a good start. I have the same battery, and with a 2.8 ohm CE4 I run at 3.8ish volts.

 

[lukasmckain]

I have a similar device, it is also a 650mAh battery, and anything above 3.7 volts seems to drain the battery quickly. That being said, I would try at 4 volts which is about 6.4 watts at 2.5 ohms.

FYI, I think the SLB version is 2.5 amp limit.

 

[joelj]

thanks for all the input guys.

For me 3.8v seems like the sweet spot.