just registered, but been looking around here for a bit. need a good RTA..

[sketch804]

Hey everyone, been vaping for the past few months now and I'm loving it once I finally found a good tank atomizer. Settled on the iClear 30b, got bad reviews online but I have had nothing but good times for the most part. Leaks a small bit but it seems to be more condensation than anything. But anyways time to move on..
Now I am trying to find a nice RTA that works well for mouth to lung hit and won't break the bank. I have been looking at kayfun lite or Kaiser RTA. I have never built coils before but looks like I could do it, done harder things before. Not looking for a sub ohm cloud chasing build, as I use an iTaste mvp2 at the moment. But one that's not wide open or adjustable air flow would be the best, but figured someone else here would have more experience.

Thanks all!

 

[Altaire Versailles]

I just bought a kanger subtank as my first rba. All the reviews for it were good, 37 bux on fasttech with the xmas14 code. It's an rta, rda and rba all in one depending how you want to configure it.

 

[sketch804]

I hate to say it but I can't spend my money with Kanger anymore, had 3 products by them, all crap. I do hope they're quality has improved for this new tank. That's pretty sweet you can configure it different ways though, very nice concept! Thanks for the suggestion!
Oh I have to mention I cannot do sub ohm builds on either battery I have.

 

[CajunCloud]

I've been looking into the RTA setups myself for a first go a building coils. From what I have found I am leaning towards the Lemo by Eleaf. Seems to have lots of good reviews and the price is right. Either that or a Kayfun Lite 2 clone perhaps. I'm not looking to sub ohm or anything like that. I like the vape rate I get with 1.8ish ohm coils at 6-10w depending on the juice and only want to build in that range.

CC

 

[dice57]

A great first rba tank system, would be the flash-e-vapor V2 or V3. Simply a fantastic tank, that's a dripper too. Vape well at any level of watts, an exceptional atomizer. Large build deck, can work on build when tank is full, can use with dripper cap and drip instead. Excellent tasty vape. Remains to be a top contender. Just saying



Vape long and Prosper.!!!

 

[daleron]

Welcome to ECF Sketch, make yourself right at home

 

[Frenchfry1942]

Welcome Sketch! Rebuilding is so much better. Have fun!

 

[jambi]

This https://www.fasttech.com/p/1700500 was my first rebuildable. Couldn't have made a better choice. Simple to build, very forgiving, works and works and works some more.

 

[Mccannch]

First, let me start off by saying I am a Lemo Fanboy. I own four of them and they are the only devices that see action on a daily basis. My other atomizers are just to play around with at this point. The Lemo is a great product for people just looking to get into RTA devices. First, it comes with a prebuilt coil. Out of the box I suggest changing the cotton (although I didnt on one of mine and it worked fine.) and using the stock coil. Take the device for a drive before you break it all down. Building your first coils can be difficult and frustrating, its nice to know what you should be looking for before you get into it. The Lemo is just a great all around product for its price range, the build deck is gigantic compared to other products on the market. Anyways, goodluck on your RTA adventure!

 

[sketch804]

can you control the airflow on the lemo or kayfun lite? I'd like to have one with sort of a tightish draw, as I am not a lung hitter atm. I appreciate all the great feedback! Thanks all!

 

[joesquid]

I'd recommend the Ehpro Kayfun lite V2 dual air flow. You can control the airflow with adjustment set screws. FluidVapes has them for $30.

 

[Wolfenstark]

I have a ehpro kayfun light + v2 which is good and i just ordered a lemo drop which i also expect to be good.

 

[RandyF]

I have 3 Kayfun Lite+ v2's and they have been sitting around not getting used since I got my Lemo's. I am definitely a Lemo fanboy, but it is hard not to be with such a nearly perfect tank system. There is also the Lemo Drop if you want a shorter version, at the expense of a couple ml's of juice.

The Kanger Subtank looks like it will be a winner, but I would definitely wait till it has been out a bit longer. They have already revised the coils 3 times in a short amount of time. It seems like they have it pretty dialed in, but I imagine there will be some revisions to the atty itself in the near future.

 

[Warpigs]

Welcome to ECF!

 

[CajunCloud]

Wow this thread has brought the Lemo Drop to my attention I was unaware of it until now. I think that would be more suitable for my first RTA. I noticed you mentioned wanting a setup that required drawing and from all I have reviewed the Lemo is very airy but that was with people having the airflow set wide open that like that airy vape. So I would imagine that the draw could be tightened to your desired pull as well. Drop it is for me. Now when to "drop" the $$ on one and get into rebuilding hmmmmm lol. New year most likely. Plus I need to search for the best deal on one if I can find one in stock. Already sourced a good deal on the Lemo original. Kayfun Lite 2 clone is still calling as well. Maybe both? I do like flavor changes often after all

CC

 

[Katya]

Yup, Lemo seems to be all the rage--easy to build, large deck, simple single coil Kayfun style built, more air than Kayfuns.

The only minor complaint I've seen is the clumsy airflow control--nothing else, really. Oh, and the 23 mm diameter--most people would prefer a 22 mm device. That said, the Sub Tank is a whopping 25 mm...

And it's not a clone, for a change. It's an affordable original design, albeit based on the Svoemesto's Kayfun.

 

[Katya]

Wow this thread has brought the Lemo Drop to my attention I was unaware of it until now. I think that would be more suitable for my first RTA. I noticed you mentioned wanting a setup that required drawing and from all I have reviewed the Lemo is very airy but that was with people having the airflow set wide open that like that airy vape. So I would imagine that the draw could be tightened to your desired pull as well. Drop it is for me. Now when to "drop" the $$ on one and get into rebuilding hmmmmm lol. New year most likely. Plus I need to search for the best deal on one if I can find one in stock. Already sourced a good deal on the Lemo original. Kayfun Lite 2 clone is still calling as well. Maybe both? I do like flavor changes often after all

CC

I like the way you think.

 

[Katya]

I have 3 Kayfun Lite+ v2's and they have been sitting around not getting used since I got my Lemo's. I am definitely a Lemo fanboy, but it is hard not to be with such a nearly perfect tank system. There is also the Lemo Drop if you want a shorter version, at the expense of a couple ml's of juice.

Enablers...

The Kanger Subtank looks like it will be a winner, but I would definitely wait till it has been out a bit longer. They have already revised the coils 3 times in a short amount of time. It seems like they have it pretty dialed in, but I imagine there will be some revisions to the atty itself in the near future.

I like everything about the Sub Tank but the size. 25mm diameter? Seriously? I'm hoping for a nano 22 or 19mm version.

 

[Fn4578]

I just bought a kanger subtank as my first rba. All the reviews for it were good, 37 bux on fasttech with the xmas14 code. It's an rta, rda and rba all in one depending how you want to configure it.

Is it a good tank? Been thinking to grab one.

 

[Katya]

Is it a good tank? Been thinking to grab one.

It's brand new so there is no real track record. I'd wait a bit and read more reviews.