JustFog S14
- Thread starter GranFumador
- Start date
- th_trl_thread_readers 0
- Status
Should you change your mind, these adapters are available at nearly any vape shop on line, or B&m.
Eleaf iStick eGo Adapter
Thank you!! The coils say like 4volts?? Can you push the voltage higher without burning? I know getting replacement coils for this is very difficult. I don't intend on buying in bulk from China. I don't want to ruin the coil! Thanks again!!!
Hi, JGD,
I may be the wrong one to ask. I like a cool or warm vape, so I usually stay under 10 watts. That gives me approx. 4 volts. I'm happier at 9.4 watts, 3.8 v.
Burned cotton is good for only one thing: trash bin. I wouldn't go much past 4.0 volts unless you have coils to spare.
Ok, thanks. I was just curious how high I could push up the wattage/voltage if I got the adapter. On the Ego Twist I think it maxes out at 4.8 volts. I've been using it fully cranked and it's been fine. When I turn it down it seems to barely produce vapor.
I hope coils for this become more accessible. It's a nice low tech car option
This was a sweet gift from a great ECF friend!
Hey there...I won this tank as well and also had to pay the 22 dollars to get it to me.
It's my out and about tank on top of a vison spinner.
I'm on my third (I think) recoil and wick with it.Recoiling is fairly straight forward but a tad more difficult to take apart than my pro tank coils.I've gotta actually use needle nose pliers on their coils rather than using my fingernails for taking apart pro tanks.
All in all it's a nice lil tank!
It's my out and about tank on top of a vison spinner.
I'm on my third (I think) recoil and wick with it.Recoiling is fairly straight forward but a tad more difficult to take apart than my pro tank coils.I've gotta actually use needle nose pliers on their coils rather than using my fingernails for taking apart pro tanks.
All in all it's a nice lil tank!
Ok, thanks. I was just curious how high I could push up the wattage/voltage if I got the adapter. On the Ego Twist I think it maxes out at 4.8 volts. I've been using it fully cranked and it's been fine. When I turn it down it seems to barely produce vapor.
I hope coils for this become more accessible. It's a nice low tech car option
This was a sweet gift from a great ECF friend!
Two things—
First, I think the issue is with the mod, not the tank or coils. I have used the clearo on istick 30s and 40s, Picos, Defender 50s, and the Invader Mini. It performs very nicely on all of these at low wattages. You can pick up a pack of five converters from fasttech (my least favorite vendor) for a few bucks.
$3.38 510 to eGo Adapters for E-Cigarette (5-Pack) (510 to eGo, Brass: 5-Pack) at m.FastTech.com
Second- I bought a few five packs of coils from a Canadian e-bay vendor. I offered something lower than the asking price, and the offer was accepted. Quick delivery, no problems.
Recoiling isn't that difficult,give it a whirl.My first attempt didn't work out that well but the second one did and after some practice it got really easy.If you're a jeweler you'd have all the tools you'll need.
Check your messages. I've sent you the vendor info. She still has them available.
For what little it may be worth, I have really enjoyed these clearos, but a good
fellow vaper gave me an Ego One Mega VT. I subsequently got the newer V 2, and the smaller XL. All produce fine flavor and vapor similar to that of the Justfog hybrid,
but they are easier to find, as are the superb CLR coils. I had no experience re-wicking or re-coiling, but have done that many times now with the CLRs. It is really easy, even with one hand temporarily out of commission. Takes about five minutes to do a rebuild, a minute just to put in a new wick. Final benefit of the Ego One CLR coils and tanks: They are cheap! and 510 threaded.
eGo ONE tank series – CLR coil
- Status
Similar threads
- Locked
