Jwraps - Mod wraps. Custom designs stylish tube mod wraps.
- Thread starter kickitback
- Start date
- th_trl_thread_readers 0
- Status
hey bud,
We tested the black mamba and didn't like it. it is very thin and rip easily, just not up to par with everything else we carry. if a wrap or material will not be 100% and may create an issue for the user we will not carry it. If you really want i can make it for you, I have the material here just not recommend it.
The kay fun will be three different pieces - top, bottom and middle screen. We made slots on the screen piece so you can see the juice
level.
Clear, clear printed and print design vinyl will go over engraving but will go in/take the shape of the device the longer you keep it on. Vinyl tends to bond real good.
We have the charcoal Carbon as well yes.
We tested the black mamba and didn't like it. it is very thin and rip easily, just not up to par with everything else we carry. if a wrap or material will not be 100% and may create an issue for the user we will not carry it. If you really want i can make it for you, I have the material here just not recommend it.
The kay fun will be three different pieces - top, bottom and middle screen. We made slots on the screen piece so you can see the juice
level.
Clear, clear printed and print design vinyl will go over engraving but will go in/take the shape of the device the longer you keep it on. Vinyl tends to bond real good.
We have the charcoal Carbon as well yes.
yes.
Any design you see on the site will go on any device except box mods - some material will not work on the box mods and we took them off the device options.
The Diamond plate is available on all tube devices.
I've seen J-Wraps on Provaris at vapemeets.
They look and feel very good. I used J-Wraps on my Vamos and not a regret was had.
If I wanted to dress up or protect a Provari a J-Wrap is what I'd use.
Excellent company & product
They look and feel very good. I used J-Wraps on my Vamos and not a regret was had.
If I wanted to dress up or protect a Provari a J-Wrap is what I'd use.
Excellent company & product
I've seen J-Wraps on Provaris at vapemeets.
They look and feel very good. I used J-Wraps on my Vamos and not a regret was had.
If I wanted to dress up or protect a Provari a J-Wrap is what I'd use.
Excellent company & product
Thank you for your kind words
Both of the Innokin Brothers are now properly attired in JWraps Black Carbon.
Thanks kickitback.
Thanks kickitback.
New stand we made today.
Mid range for people who don't want/need a big stand.
Called - no name ( for now )
Only 8" by 8" by 2" high.
Priced at $49.85
No name stand;
13 devices,
9 battery slots
Large box mods slot
Juice slot
4 atty/RBA/RDA - 510 threaded slots
13 drip tips
Device:
2 slots for 26650 devices or smaller
1 ZNA/ZNA LITE or regular device up to 24mm
10 regular devices up to 24mm
Batteries;
18350-18650 X 9
Juice:
Large slots to accommodate up to 6 30ml juices.
Box mods;
2 large box mods ( bigger then Hana) or 3 mid range ( hana, Hana mini, Hana clones, MVP, VTR, vapor shark, DB, billet box etc).
Hope you like it
Mid range for people who don't want/need a big stand.
Called - no name ( for now
)Only 8" by 8" by 2" high.
Priced at $49.85
No name stand;
13 devices,
9 battery slots
Large box mods slot
Juice slot
4 atty/RBA/RDA - 510 threaded slots
13 drip tips
Device:
2 slots for 26650 devices or smaller
1 ZNA/ZNA LITE or regular device up to 24mm
10 regular devices up to 24mm
Batteries;
18350-18650 X 9
Juice:
Large slots to accommodate up to 6 30ml juices.
Box mods;
2 large box mods ( bigger then Hana) or 3 mid range ( hana, Hana mini, Hana clones, MVP, VTR, vapor shark, DB, billet box etc).
Hope you like it
Would it be possible to post the measurements of the openings in the stands? I have mostly MVPs and iTaste VV v3s (2 and 4 of each respectively) but what I really want a stand for are toppers (510 and ego) and juices. I'd also love to know whether my USB charging hub would fit in some of the charger spots.
I'm not really interested in spots for drip tips since I think, but can't be sure without measurements, that the spots would be too small for sample bottles of liquid.
I'm not really interested in spots for drip tips since I think, but can't be sure without measurements, that the spots would be too small for sample bottles of liquid.
Wow buddy your website sure is looking good. i remember when you just started, now look at em all. dang your talented. so talented i had to put up my signature again. i'm so proud of you.
Meems
Meems
Hey girl,
So good to finally see you around, it's been awhile
Hopefully all is good and thank you so much for the kind words. It's so much fun creating and coming with new ideas that make people happy. Very blessed and thankful for sure
Don't be a stranger
So good to finally see you around, it's been awhile
Hopefully all is good and thank you so much for the kind words. It's so much fun creating and coming with new ideas that make people happy. Very blessed and thankful for sure
Don't be a stranger
Yah i heard you were having nitemares after i left... all shivering in your blankies going on about doing yourself in if i didnt come back"...so yah i figured i'd come tuck you in.
Oh boy, okay ima go lookee loo on your site for some stuffems on provari's weeeee!!
Meems
Oh boy, okay ima go lookee loo on your site for some stuffems on provari's weeeee!!
Meems
Hey girl,
So good to finally see you around, it's been awhile
Hopefully all is good and thank you so much for the kind words. It's so much fun creating and coming with new ideas that make people happy. Very blessed and thankful for sure
Don't be a stranger
I just wanted to say thanks for the special effort to make me the Diamond Plate wrap for my ProVari mini, it has never looked this good.
NEW WRAPS!
Variant by vicious ant
Wizard evolve II DNA30
Hammond box 1591
Hammond box 1591B
Genome DNA20
Variant by vicious ant
Wizard evolve II DNA30
Hammond box 1591
Hammond box 1591B
Genome DNA20
Not sure what happened. We had that banner posted Thursday .
New designs:
New cup holders:
Added the ego/spinner/winder cup holders and will be adding the Reo later on as well
New Goliath stand with box mods addition and extra ZNA/ZNA lite or side button devices. Extra atty slots and extra batteries.
New designs:
New cup holders:
Added the ego/spinner/winder cup holders and will be adding the Reo later on as well
New Goliath stand with box mods addition and extra ZNA/ZNA lite or side button devices. Extra atty slots and extra batteries.
- Status