K100/ Kayfun lite

[Ethynol]

I have a Kamry 100 and I like to use 18350 batteries on it with a kick. I also am using a kayfun Lite. I am curious what kind of coil builds should I be using? How many Ohms? I like plenty of vapor and a good throat hit if that helps at all.

 

[Susan~S]

Hello and welcome to the forum. Glad to have you here!

Are you familiar with battery safety, ohms law and amp limitations? How many amps are your batteries rated at? Do you have an ohm reader?

 

[Ethynol]

I am not. I probably need to be directed to all that information. If you could link me to that that would be great! if not a little search for these thing shouldnt be to hard . They are 3.7 v 900 mAh 18350s

 

[Ryedan]

I would aim for 1.5 ohms and use the kick to set the wattage to what you like. I would try a slightly bigger micro coil style build, say 2mm inside diameter. Do it the typical horizontal build way that a bunch of videos show. Be really careful not to close off the top of the juice channels with your wicks or you'll get dry hits.

 

[Ryedan]

They are 3.7 v 900 mAh 18350s

Which brand and model of battery is that?

 

[Susan~S]

I am not. I probably need to be directed to all that information. If you could link me to that that would be great!

Baditude (our resident battery/safety expert) put these blog posts together for anyone interested in getting into Mechanical Mods & RDA/RTA's with MANY links:

1. Inexpensive Mechanical Mod/RDA Setup
2. Information Resources for Your First RBA


It is very important that you take the time to familiarize yourself with much of this information in order to vape safely using a mechanical mod and rebuilding your own coils.

 

[Ethynol]

Thank you very much Susan-S. ! Now to just figure out If I can get my coil to heat up faster.