Kamry K101 Question

[jpark3r]

How do you know if a mech mod (Kamry k101) is shorting? I don't think mine is, but I read not to tighten the body too tight or it could...mine I keep fairly tight as with it loose it kind of rattles. My button has to move a fairly small amount in my opinion to fire, but when I let off the atomizer stops producing vapor so I'm assuming I'm good? Just want to be sure.


Sent from my iPhone using Tapatalk

 

[jpark3r]

What started to concern me I guess is after a week of using it, it seems like the spring has broken in now and the button press to fire is minimal now.


Sent from my iPhone using Tapatalk

 

[Stosh]

Welcome to ECF!!

If you had a short, you wouldn't get any vapor and the battery would be getting hot from the high current draw. I have a couple of the K-100, basically the same with some different slots in the body for appearances. The switches do seem to break in after a week or so, or it may be we're just getting used to the throw and tension.

You should also put a very small dab of Noalox on the body and bottom threads. It will keep them working smooth and lessen any rattles or looseness. When I change a battery or carto, I'll unscrew the telescope portion first, then unscrew the bottom or carto. Replace the battery and tighten the bottom, and then gently snug up the telescope sections.

 

[jpark3r]

Thanks for the welcome and info...that's what I figured would happen, but wanted to verify (safer than sorry). Its a nice vape though and really happy I got it.

I change my batteries the same way too hah.


Sent from my iPhone using Tapatalk

 

[Stosh]

There was a K-100 K-1010 lovers thread floating around a little while back, we're not the only fans...