Kanger coils??
- Thread starter EASY_E
- Start date
- th_trl_thread_readers 0
- Status
i know the Evod and protank use the same coil, it used to be using an evod coil in a protank would be a tighter draw but now they are the same and being sold as evod/protank heads.
It's either you can use the t3s coils in the protank/evods, or you can use the evod/protank coils in the t3s, but I can't remember which one will work in all three. Discountvapers.com I think explains which can be used in which tanks.
im wondering if kanger coils are universal for all the kanger clearomizers or not. Im purchasing a kanger t3s and the only extra 1.8 coil heads i can find are for the pro tank. will they work for the t3s?
No, you can't! The T3S coils work only in T3S, MT3S and baby T3S clearos. Evod coils work in eVods and ProTanks 1 and 2.
Protank 3 and Aero are dual coils and are not compatible with single coil bases....
Agreed with the above. Just for clarity, here's what you'll see out there:
* eVod, Mini-Pro Tank (1&2) and Pro-Tank use the same coil (long one only, short doesn't work with ProTank)
* T3S and MT3S use the same coil
* Protank 3 & Aero Tank use the same coil
Hopefully that's clear! (As mud...)
* eVod, Mini-Pro Tank (1&2) and Pro-Tank use the same coil (long one only, short doesn't work with ProTank)
* T3S and MT3S use the same coil
* Protank 3 & Aero Tank use the same coil
Hopefully that's clear! (As mud...)
Great...just when I had things figured out.
The thing that confuses me the most is how similar the MT3S and ProTank style coils are...almost impossible to tell the difference. Yet, if you put a ProTank coil in the MT3S, it won't screw in by just a hair. I had to stop using my MT3S when I started rebuilding in order to avoid confusion with the parts. Might have to try out that base, though...that would be perfect!I may be wrong about the Protank heads fitting in the MT3 base. The site that I first saw the base on is no longer showing that they're compatible with the base itself. So it's likely that the MT3 heads are still slightly different from the Protank heads. Which is a bummer.
I've got a P2. I've managed to rebuild it several times and the leaking disappeared. Then just recently the leaking started like crazy. I have no idea why. And so I got curious about the X9 Protank, which I've read is compatible with P2. I bought 2 and extra five coils to see if they're compatible with the P2, which they were, and so far the X9 tank has been performing well without the leaks and all the issues I've had with P2. I then changed the P2's coil with the X9 coils. No issues. The P2's coil shaft is longer and the X9 is shorter, but I don't think that's causing the leaking. I really have no idea what's causing this leaking. So now, based on this I'd buy another X9 instead of P2, or just X9 coils.
I think you are...
However, one can get new T3S and MT3 bases (to be used with T3S coils) and turn one's old T3, MT3 and baby T3 clearomizers into the "S" version (without buying new "S" clearomizers). I've done it and they work fine.
T3 coils are just a bit more narrow. Therefore they will fit in an evod for instance (don't know how well it would work). The evod/protank head will not fit in the T3 regardless of the base. The top portion is just too narrow to screw down over the evod/protank head.
I think Kanger should slow down a bit with all the new releases and get this mess under control.
Here's my 2 cents: your evod/ pro tank atty will work on a t3s. T3s attys can be difficult to find at a B&M. Many people have no issues with this, some have found their t3s to leak with the pro tank att. IF that happens, look at where the gasket from the atomizer meets the tube you draw from and you'll notice a gap. Take the atomizer off, take that gasket off and turn the gasket upside down and place it back on. That usually resolves any leaks.
as others have stated kanger t-3 coils are not compatible with other kanger tanks
Btw your pic has an awesome shar-pei! It's not vape related, but that's a very under appreciated dog.
Since it hasn't been mentioned, I'll add a bit more confusion...
Evod ProTank heads can be used in anyvape davide tanks. Not an Aspire edition though.
It has also been reported, with using an extra chimney grommet, Evod ProTank single coil heads can be used in the aero tank.
Evod ProTank heads can be used in anyvape davide tanks. Not an Aspire edition though.
It has also been reported, with using an extra chimney grommet, Evod ProTank single coil heads can be used in the aero tank.
thanks and yes i agree with you!!!! we have 2 shar pei!! my fiance just bought me our second one today for valentines day,they are very good dogs!
- Status
Similar threads
- Locked
