Kanger Protank 2 Mini Problems :[

[bosswick]

Hm. So.

I just got my MVP V2 with my Protank 2 Mini on Saturday.
Filled her with some Ocean Breeze by MBV (80/20 if it matters) and vaped the tank until it was a little under 1/3.
I decide to try another juice I got with the whole package, this time in the iClear 30 that came with my MVP.
No problem. Both work great. I'm a happy camper.

Fast forward to this morning. I fill the Protank 2 Mini before I go to work. I take a few test puffs. Nothing.
Ohm reader reads "NON". I say screw it, I'll just fill my iClear and get to work.

Now, after replacing the coil, doing everything i know, I can't get my MVP to read its Ohms, nor even vape using the Protank.

I do notice that the bottom piece that you unscrew is slightly tilted after screwing in... like the threads aren't catching it correctly.
I'm wondering what to do.

 

[Jsucool76]

You need to do a post pull. xD That happens with my aspire. The center post of the MVP is a little low, so it won't always make contact.

A PBusardo Tutorial - How to Pull Your Post ;-) - YouTube

^^ There is PBusardo's tutorial on post pulling. Basically you wanna pull the center pin on your protank out a little bit so its make contact with the MVP's center pin.

 

[Sugar_and_Spice]

Pour any ejuice back into your bottle and carefully unscrew the bottom of the protank. Then take it all apart and put it back together. Maybe the airshaft was not in all the way? Let us know. If it reads NON then there is no connection being made from the protank to the MPV.

 

[bosswick]

You need to do a post pull. xD That happens with my aspire. The center post of the MVP is a little low, so it won't always make contact.

A PBusardo Tutorial - How to Pull Your Post ;-) - YouTube

^^ There is PBusardo's tutorial on post pulling. Basically you wanna pull the center pin on your protank out a little bit so its make contact with the MVP's center pin.

I just don't know why it'd make a connection before and not now Also the tilted treads scare me. D:

Pour any ejuice back into your bottle and carefully unscrew the bottom of the protank. Then take it all apart and put it back together. Maybe the airshaft was not in all the way? Let us know. If it reads NON then there is no connection being made from the protank to the MPV.

I will try this after I'm done with my LoL game.

 

[bosswick]

Well. I figured it out. The coil wasn't screwing all the way in to the base or bottom part of the protank. I feel dumb. :/
I'll delete this thread once I figure out how to. ><

 

[Sugar_and_Spice]

Well. I figured it out. The coil wasn't screwing all the way in to the base or bottom part of the protank. I feel dumb. :/
I'll delete this thread once I figure out how to. ><

Don't feel bad, new things sometimes just take a little getting used to. No need to delete the thread(don't think you can anyway). It may help someone else that has this same problem.....

Glad you worked it out.

 

[AaronBoBearon]

Glad this wasn't deleted. Same exact issue I was facing. And my coil wasn't screwed in all the way either lol. Thanks for the help!

 

[BillyWJ]

Well. I figured it out. The coil wasn't screwing all the way in to the base or bottom part of the protank. I feel dumb. :/
I'll delete this thread once I figure out how to. ><

Don't delete, others can learn from our mistakes. I had the same problem with my Mini when i first got it. Keep in mind, that part the head screws into can be replaced, so if you do strip the threads, it's not the end of the world. I also bent the base part that actually attached to the threads on a head I had dry burned, which makes the head useless, there's a learning curve with all this stuff!