Kanger Subtank Mini Coil

[KjRealist]

Has anyone built and effectively used a coil lower than .5ohms for the Kanger Subtank Mini?

 

[Wraith504]

I have built them around .18 ish

 

[KjRealist]

I have built them around .18 ish

Do you use it on a box mod? If so on what wattage?

 

[Wraith504]

Do you use it on a box mod? If so on what wattage?

Yes right around 25-30 watts or so.

 

[Mogar]

My current is a .3 on a istick 50w and a Kanger Kbox. Both at 20 watts.

 

[trinity1911]

my usual build is 6 wraps 24 ga kanthal on 2.5 mm bit. right at .5. but I have gone as low as .3.

 

[KjRealist]

My current is a .3 on a istick 50w and a Kanger Kbox. Both at 20 watts.

If I go below .5 it will not work when I put the tank on with the KBOX.

 

[Hitcat44]

According to Specs, the Kbox will only go down to .4 ohm and the Kbox Mini (SubBox) down to .3

 

[Rsunderl]

From what I was able to Google, the KBox lower ohm limit is 0.4ohms

 

[KjRealist]

From what I was able to Google, the KBox lower ohm limit is 0.4ohms

Yeah I'm aware of that but I think when I was screwing on the mini tank the stem was hitting the top of the coil. Just have to keep it lower I suppose. Thanks

 

[KjRealist]

According to Specs, the Kbox will only go down to .4 ohm and the Kbox Mini (SubBox) down to .3

Thx

 

[zepplin490]

Currently running at .33 with twisted 26.... great flavor....
-MP-