Kanger Subtank Mini Problem

[GrimeVapes]

Hey I was just rebuilding my sub tank and I actually lost the little screw on the side that makes the chimney hug on to the deck. Does anyone know how I can replace this or if I can keep using it without the screw? Would I just buy an assortment of glasses screws and hope the threads aren't too long? Appreciate any answers I might get. I already posted this on a different section I think I wrote it in the wrong spot and can't figure out where it is or how to delete it.

 

[Sir2fyablyNutz]

I doubt it would work without that screw, possibly leak easily. You might try going to a local vape shop and see if they have any extras, or buy another rba.

 

[suprtrkr]

I can't help, but bump for an answer. Anybody out there know the thread spec on that screw?

 

[MoDmAnDaN]

I can't answer where to get it, but yeah don't go without it. The possibility of spinning the chimney while putting the tank together. That will ruin your wicking.

 

[Nailz]

Sure they come with a replacement in the spares bag?

 

[MoDmAnDaN]

I usually just store those bags myself and label with a Sharpie. I just checked, and yeah, they do come with one screw. I believe, the same screw works for either the posts or chimney.

 

[Maiar]

There should be a few spares in the box. I lost one myself and use the spare from the box. There should be a few spares for the posts as well. The ones for the posts will be slightly longer, you want the short one.
On the plus side, I didn't realize I'd lost it and got through a couple tanks without it leaking.

 

[90VG]

I lost mine once, same thing, had filled it up a couple times, noticed it spun when I recoiled the RBA. Remove the RBA section, get a super bright flashlight and tiny tweezers and look around in there. You might find it in the tank. That's where mine was.

I don't have a spare, used that extra screw on a bad one on my TFV4.

 

[Completely Average]

Just for the record....

The two screws on the deck are M2.00 x 0.4 threaded screws.
The screw for the chimney is a M1.4 x 0.3 threaded screw.

 

[skullblade789]

Sure they come with a replacement in the spares bag?

Kanger is usually pretty good with giving extra bits and screws. Your B&M is usually a good spot for spare parts like that too as well.