Kanger T2 help

[lynch]

I brought 2 Kanger T2 with a 5 pack of coils and cant get any of them to work ?
Tried in 5 different mods and 5 different adapters and all the coils with no luck. Thanks.

 

[Virk]

Well that's a bummer, the T2 is my favorite and I've not had a dud yet, let's see...
Have you tried it on a standard eGo battery to see if it's making a connection?
The adaptors you're using, are you using an eGo adaptor? (required to work on the T2). If so, maybe your T2 bottom post is just not making contact?
That's really all I can think of, maybe pull the post up on the eGo adaptor, I know I've got a few of those adaptors that just don't reach all the way.
I hope you get it working, they are great.

 

[lynch]

Well that's a bummer, the T2 is my favorite and I've not had a dud yet, let's see...
Have you tried it on a standard eGo battery to see if it's making a connection?
The adaptors you're using, are you using an eGo adaptor? (required to work on the T2). If so, maybe your T2 bottom post is just not making contact?
That's really all I can think of, maybe pull the post up on the eGo adaptor, I know I've got a few of those adaptors that just don't reach all the way.
I hope you get it working, they are great.

I dont have a ego battery, just mods that all work with everything else. The adapters are the ego to 510 ones and they also all work with vision and the e-1's. Will try prying the post on the adapters more and see, thats what it seems to be the problem, not getting a connection. Thanks.

 

[bmrdave]

With the adapter and my T0 I have to back it off the threads some. If I make it snug it doesn't work. Maybe the same with your T2?

 

[lynch]

Tried everything, loose, tight, prying connections and wipe them clean. I was due for a couple of clunkers
Since I have the 5 pack of coils will try ordering just one more and see If any luck.
All the reviews are good for these so guess I just had a couple of duds.

 

[Cuando]

I doubt you'd have that bad of luck. I have five of these bad boys, and a couple packs of coils, and have had zero issues. It really sounds like they are not making a connection. Either that or you had an extreme case of bad luck with this order.

 

[Zooker]

May be a super obvious suggestion, but it's worth a try--did you make sure that the head is fully screwed down all the way--each time i remove the drip tip, mine unscrews the head with it and I have to retighten it to make the connection. Hope you get it working!

 

[txtumbleweed]

I agree with Zooker and sounds like loose coil post is likely problem. Bit odd it would be two of them though.