Kanger T2 Not Firing

[POLLVX]

Hello all! Long-time lurker, first-time post.

I've had my Kanger T2's going on three years now. I've tried the Aerotanks and T3, but I rarely have any luck with the bottom coils. The problem I'm having is that all of my T2's stopped working. Here's what I've tried:

• 3 different tanks (all T2)
• Lightly pulled down the contact on the tanks
• 3 different batteries (eGo type spinners)
• Adjust the height of the battery contact
• 5 different atomizers

I'm happiest with my T2 and remember why I always went back after starting to use my T3 recently. Does anyone have any ideas on how to resolve the issue? I've searched on the forums and tried what I can find. Any help is appreciated!

 

[defdock]

used to own a t2 - and from ripping one apart, there is only a few options you have.


either your coil head is not making contact with the tank - try screwing it finger tight.

the center post is squished - you said it your self you tried pulling it out.




assuming your using an ego battery - when all is assembled, does the battery act like there is a coil on(normal button lighting), or does it blink 3-5 times?



worst case scenario - the positive post is soldered to a wire, and spinning the post caused the wire to twist and distort until it broke free its conection - if this is the case, you may need new tanks.