Kangertech Evod 2 Gurgling issues

[SliperyFingers]

I recently started having issues with my Kangertech Evod 2 gurgling and leaking all over the place. Can this issue simply be fixed by purchasing a new atomizer?

 

[CountBoredom]

It might just be that your atomizer is not screwed down in the base tightly enough. Taking the tank off and putting it back on your device can sometimes loosen the seat of the atomizer in its base.

 

[TrollDragon]

This was the main reason I stopped using evod's and switched to an Aspire Nautilus Mini. No more gurgling and just a totally better vaping experience. That was quite a while ago for me and I have since moved to rebuildable tanks (Kayfun) but the mini served me well for a long time.

Do yourself a favor and pick up a iStick 30W to go with the mini. You don't need all that power but it doesn't suffer the bad threads, sticking pin, and poor low power regulation that the iStick 20W does. The 30W will power most of the newer rebuildable tanks that are out today as well.

 

[Zealous]

The head might not be screwed down all the way. I'd check this first. You could also have a broken seal somewhere causing eliquid to leak into the center. You could also have blocked air holes at the bottom of the tank thus causing you to suck more eliquid into the wicking area than can be vaporized. If the draw does not seem to be tighter than normal than the 3rd is probably not the problem.