Kangertech subox mini

[Broj]

My sub box mini does not fire up it just keeps flashing KangerTech if anyone knows what the problem is please help

 

[classwife]

Moved you to VV/VW APV Discussion from Ask The Veterans - you need help now, not in a few days.

 

[Robert Cromwell]

Keeps flashing what?
The digital display just flashes?
Flashes a message?
Battery inserted correctly?

 

[Mushroomie]

I also am having a problem with mine it does not read certain coils I like it because it gives me more power then other mods but I don't use the tank that it came with because paint chipped on the metal that you put your glass over there for paint in juice. I use Atlantis 1 & 2 any ideas I also have two eleafs 50w. I miss my sub box mini though!

Sent from my SAMSUNG-SGH-I747 using Tapatalk

 

[Robert Cromwell]

The 510 center pin on the atomizer may mot be making connection with the pin down in the Mini mod.

I only have used the SS Subtank Mini tanks to avoid the paint thing.

 

[Mushroomie]

Is there a way to fix that? Couple of years ago hubby took apart a MVP 'll said it could not be done he brought it back to life. Had a different thread but a beauty ring fixed that. It probably still works just put away in the graveyard. LOL

Sent from my SAMSUNG-SGH-I747 using Tapatalk

 

[Robert Cromwell]

You might be able to pry up the 510 center pin in the mod a bit. Using a toothpick or somesuch. If using metal in there do NOT fire the mod while you have metal down in there.

 

[Mushroomie]

I am going to have hubby do this if I do it I will break it probably I seem to do that

Sent from my SAMSUNG-SGH-I747 using Tapatalk

 

[Mushroomie]

You might be able to pry up the 510 center pin in the mod a bit. Using a toothpick or somesuch. If using metal in there do NOT fire the mod while you have metal down in there.

So I did what you said and it worked!!! Yay!!![emoji2][emoji2][emoji2][emoji2][emoji2]
Thank you soooo much Robert! You Flipping Rock!!!

Sent from my SAMSUNG-SGH-I747 using Tapatalk

 

[Robert Cromwell]

You are very welcome.
Enjoy the vape.

 

[Mushroomie]

I am and I will! Thank You Again!

Sent from my SAMSUNG-SGH-I747 using Tapatalk

 

[chacas]

don't know if I'm posting in the correct place, but I really need some help. I've been using the subox mini since Feb and have rebuild the rba multiple times. Since a couple of days ago, I cannot seem to wick a correct coil. I am constantly having dry hits.

I've tried with less wick and it flooded. More wick, dry hit again. I am using a 0.6 coil and normally vaping between 18W upto 35W. right now even with 15W I have the burnt taste.

any ideas why?

 

[Robert Cromwell]

Is the positive pin loose? Had one with that trouble. tightened it up and no more issues.

 

[chacas]

What pin? I am afraid that if I tighten it any more I will break the glass.

 

[Robert Cromwell]

The little pin that goes up thru the RBA deck to hold the positive post in place. Do either of you posts in the RBA deck have any wiggle?

 

[chacas]

No everything seems stable enough

 

[Robert Cromwell]

Stick an allen key thru the hole s in the bottom pin on the RBA and see if you can tighten just a bit. Not super tight just good and snug.

 

[chacas]

Dissambled all the tank and cleaned it. Didn't know that pin could be screwed. Coiled and wicked with very few cotton. Till now no dry hits. We'll see if it leaks again though I have tightened the pin as suggested. Thanks Robert

 

[chacas]

The leaking issue stopped so I guess it was the pin. However, burnt taste again. I'm getting really sick of not being able to vape. And now I am thinking that it's because of the muji cotton