Kangertech Subtank Mini Leaking
- Thread starter Fluffeh
- Start date
- th_trl_thread_readers 0
- Status
By chance are you using the rba? I found that if you stuff too little cotton in the rba it is more prone to spitting and thus you get juice st the chimney.
But, do take not along the way some juice is going to accumulate at the drip tip. Due to several reasons:
1. You didn't inhale all the vapor produce and some of em are in the chimney and condense back in to liquid form.
2. Spitting. Nowhere by when you fire the coil does a lot of poping and crackling sound and sends droplets of juice all around the rba and also the chimney.
3. Over Tightening of the OCC/RBA where the silicon gasket got squeeze out of its seat and prone to minimal leaks. Over time you will get juice in ur airflow chamber if this is the case.
More or less there will be some along the way, so get your tissues ready!
Vape on.
P.s. for the sake of proof I will attach a pic of my STM with bell cap about 30 puffs.notice the condensation and the juice trap around the drip tip base.
But, do take not along the way some juice is going to accumulate at the drip tip. Due to several reasons:
1. You didn't inhale all the vapor produce and some of em are in the chimney and condense back in to liquid form.
2. Spitting. Nowhere by when you fire the coil does a lot of poping and crackling sound and sends droplets of juice all around the rba and also the chimney.
3. Over Tightening of the OCC/RBA where the silicon gasket got squeeze out of its seat and prone to minimal leaks. Over time you will get juice in ur airflow chamber if this is the case.
More or less there will be some along the way, so get your tissues ready!
Vape on.
P.s. for the sake of proof I will attach a pic of my STM with bell cap about 30 puffs.notice the condensation and the juice trap around the drip tip base.
So you're saying that its normal? Btw, are you using the IPV4s?By chance are you using the rba? I found that if you stuff too little cotton in the rba it is more prone to spitting and thus you get juice st the chimney.
But, do take not along the way some juice is going to accumulate at the drip tip. Due to several reasons:
1. You didn't inhale all the vapor produce and some of em are in the chimney and condense back in to liquid form.
2. Spitting. Nowhere by when you fire the coil does a lot of poping and crackling sound and sends droplets of juice all around the rba and also the chimney.
3. Over Tightening of the OCC/RBA where the silicon gasket got squeeze out of its seat and prone to minimal leaks. Over time you will get juice in ur airflow chamber if this is the case.
More or less there will be some along the way, so get your tissues ready!
Vape on.
P.s. for the sake of proof I will attach a pic of my STM with bell cap about 30 puffs.notice the condensation and the juice trap around the drip tip base.
Yup, its normal for me ever since I started vaping. Occurs to all my friends' atty too.
And yes, I'm using the ipv4s. Loving it. [emoji13]
And yes, I'm using the ipv4s. Loving it. [emoji13]
Im thinking of getting the IPV4s too. Does it have any problems?
So far I've non other than the presets resetting problem. And I've had a trick to get it not to reset. You can read at my post.
A 120w power machine and TC mod. Nothing more I can ask. Also a notable feature. If say my current battery level are not safe to run a 0.2ohm build dripper it will not fire. It will show 'CHECK BATTERY'. Lil' more safe to vape on crazy builds IMHO.
Vape On!
A 120w power machine and TC mod. Nothing more I can ask. Also a notable feature. If say my current battery level are not safe to run a 0.2ohm build dripper it will not fire. It will show 'CHECK BATTERY'. Lil' more safe to vape on crazy builds IMHO.
Vape On!
It will. You're using a subtank mini right? It will perform well. Even with other tanks.
Im vaping with the IPV4s right now and im using my subtank mini. But why does it produce so little cloud? Its sitting at 0.7 ohm. But the ohm goes up and down like sometimes its at 0.7 but then it goes to 0.8,0.9 and 1.0. Do i need to recoil my tank?
I think that may due to a loose screw holding the coil down. That's why its jumping. 0.7ohm can try out at 15 watts big full open airhole.
Vapor production also has to do with your VG content, airhole and coiling. What wires you using now at what size, how many wraps and what internal diameter?
Vapor production also has to do with your VG content, airhole and coiling. What wires you using now at what size, how many wraps and what internal diameter?
- Status
Similar threads
