I got a KF4 clone from 88Vapes and I can't get this thing to read on my ohm meter or cana. I've cleaned and dried it and put a basic 1.2ish coil on. I'm not new to rebuilding so I know to look out for wires touching, the bottom pin to make contact, etc.
The weird thing is that when on the ohm reader if I put sideways pressure on the deck it'll sometimes read it at like 3ohms and jump around. This tells me that theres something not making a good connection. I tried removing the spring and backing out the air screw to make direct contact with the metal nut and 510 pin but still no dice. I'm just at a loss.
The weird thing is that when on the ohm reader if I put sideways pressure on the deck it'll sometimes read it at like 3ohms and jump around. This tells me that theres something not making a good connection. I tried removing the spring and backing out the air screw to make direct contact with the metal nut and 510 pin but still no dice. I'm just at a loss.