Kayfun lite plus V2, drop kit

[Myah_June2014]

Hi all, I know all you KFL experts can help me with this. When I ordered all my gear I got a nano Kit for my KFL+V2 which I like but think the drop kit is more what I want as it obviously just shortens it a little, instead of making it completely "different" tank.. I asked vivid smoke if there's compatible w/ v2 & it's not. Lots of the Nano kits aren't either but I'm wondering since mine is if that would help the drop kit sit flush? Any help, anybody know where a drop kit is available for v2? Just incase, this is what I'm looking for:

 

[Sthur]

You mean like this? Kayfun Nano / Drop Kit Conversion Parts

 

[Despraci]

Actually is should be compatible with the V2 and not the V1. V1 KFL+ had the top cap milled out deeper and the nano chimney was too short to reach the top cap and seal correctly.

I am pretty sure I am correct, but not 100% sure.

 

[Myah_June2014]

You mean like this? Kayfun Nano / Drop Kit Conversion Parts

This is the Nano Kit I have. I want the one that just shortens it with the ss rings & has the KFL look, just shorter size, rings are just smaller which is what drops it... Unless I'm wrong? This is the 1st time I've seen the brass rings w/ tube. Some say nano/drop kit & some say just drop kit. Sorry if I'm confusing anyone, been a long couple days!

 

[Despraci]

One like Sthur linked would work I believe. Personally I like the one you got better, but I use the full size tanks and don't like the rings. Just my preference.

 

[Myah_June2014]

OK, 1st picture is what I got which is more of the "nano kit"
2nd picture is what I'm looking for & is "drop kit

 

[Myah_June2014]

Wouldn't let me post 2 @ once.... Here is what I'm looking for & sorry so many pics, just easier.

 

[Myah_June2014]

Actually is should be compatible with the V2 and not the V1. V1 KFL+ had the top cap milled out deeper and the nano chimney was too short to reach the top cap and seal correctly.

I am pretty sure I am correct, but not 100% sure.

With the one from eciggity I'm wondering since they gave me a different chimney if it would work. The chimney from eciggity pick does look different from the 1st pic with actual rings. Maybe I should email them. It's just confusing as some list nano drop kit together but there are 2 different versions. 1 like mine which is same he posted & the one with smaller rings which is what I'm trying to find.

 

[Despraci]

They are both considered to be nano kits. One just uses a special tank and the one you want uses a smaller ring and utilizes the half tank. Both use a shorter chimney top.

 

[yOGi805]

I like that drop kit pictured and would like a link to where I can get one for both of my KFL+2s.

 

[Susan~S]

Everything I have read says the drop kit WILL NOT work with the Kayfun Lite+ v2. See post #3. Nano Kit for Kayfun Lite Plus V2?

And this is the Quartz nano kit: http://www.vividsmoke.com/kayfun-quartz-nano-kit.html
Compability:
MOST CLONES (HCigar, EHPro, Tobeco, Infinite, etc.)
KAYFUN 3.1
KAYFUN LITE
KAYFUN LITE PLUS
RUSSIAN 91%
RUSSIAN FULL SIZE
Note: Does not work for Kayfun Lite Plus V2.

 

[mmsjs5]

I have an EHPRO Kayfun Lite + V2....Would you be interested in waiting a bit to get it from China? https://www.fasttech.com/p/1649900 If the top cap of the chimney is flat on the nano kit you have, this will work, but you have to use a flat chimney cap. If it is domed, it will not work. I have 3 different types of conversion kits, and on each of them I have to use the flat chimney cap for the Kayfun to screw together.

 

[Despraci]

I have an EHPRO Kayfun Lite + V2....Would you be interested in waiting a bit to get it from China? https://www.fasttech.com/p/1649900 If the top cap of the chimney is flat on the nano kit you have, this will work, but you have to use a flat chimney cap. If it is domed, it will not work. I have 3 different types of conversion kits, and on each of them I have to use the flat chimney cap for the Kayfun to screw together.

So is it the dome cap that prevents the top cap from screwing down?

 

[mmsjs5]

So is it the dome cap that prevents the top cap from screwing down?

That was the only difference between the kit that worked and the kits that did not work. I mixed and matched until I got one that the top cap of the Kayfun would screw onto, and that's when I saw the domed vs the flat.

 

[Despraci]

That was the only difference between the kit that worked and the kits that did not work. I mixed and matched until I got one that the top cap of the Kayfun would screw onto, and that's when I saw the domed vs the flat.

Good to know. Thank you.

 

[Kyi]

So that nano kit will work with all other clones except the Ehpro v2? Or just v2 in general?

 

[mmsjs5]

So that nano kit will work with all other clones except the Ehpro v2? Or just v2 in general?

I have no idea on that, I only own the Ehpro version.

 

[Verb]

If the chimney fits inside the drip tip, just use the smaller rings with the longer chimney. Or small rings, longer chimney with no drip tip.

 

[Myah_June2014]

I have an EHPRO Kayfun Lite + V2....Would you be interested in waiting a bit to get it from China? https://www.fasttech.com/p/1649900 If the top cap of the chimney is flat on the nano kit you have, this will work, but you have to use a flat chimney cap. If it is domed, it will not work. I have 3 different types of conversion kits, and on each of them I have to use the flat chimney cap for the Kayfun to screw together.

I'm gonna order this one from fastest, at least it's only $5. I got sent a 2nd chimney with the eciggity nano kit so hopefully it will work. This is the one you got? Ty

 

[mmsjs5]

I'm gonna order this one from fastest, at least it's only $5. I got sent a 2nd chimney with the eciggity nano kit so hopefully it will work. This is the one you got? Ty

Yep, that's the one I got.