Hi folks, i bought a kanger Kbox about a month ago and despite regular leaking problems i've been enjoying it, however i took the battery out the charge the other day and after i put it back in the box is reading 9.99 ohm and 0 volts. I've tried changing the coil but no joy and thats the limit of my e cig knowledge expended, anyone able to help?
Kbox 9.99ohm 0V?
- Thread starter Gustar
- Start date
- th_trl_thread_readers 0
- Status
Sounds to me like it's not making contact with the atomizer. 9.99 @ 0v sounds like a missing connection. Try a different atomizer (with a longer 510 pin) - clean the device's contact, make sure the 510 housing is still intact *not falling through the device), and if all else fails... get an exchange.
As CW said.
The Kbox Mini nor the Kbox have spring loaded center pins in the 510 connector and this can be an issue.
sometimes you can gently pry up on the center pin just a bit with a toothpick or something.
The Kbox Mini nor the Kbox have spring loaded center pins in the 510 connector and this can be an issue.
sometimes you can gently pry up on the center pin just a bit with a toothpick or something.
used a pair a tweezers on the pin and it seems to have worked, thanks for the help! I'm also having that leaking problem if anyone has any advice? i think its because the coil is heating up too much as they apparently do with this box, so i keep the temperature control off and the wattage down but can still only get 2/3 consecutive draws from it before it leaks
- Status
Similar threads
