Labelling carts for quick identification?

[Winace]

OK, here is the latest issue I am trying to resolve. I now use carts, thanks to the eheim and ADM mods.

If I have 5-6 carts made up with different flavors. How can you identify which is which? Same goes with my 3ml sample bottles, I always mix them up. Anyone have a good labelling method???

 

[Kent C]

Some earlier threads on the same subject. Kristin's idea works pretty good:

http://www.e-cigarette-forum.com/fo...elling-marking-your-510-atts-carts-batts.html

http://www.e-cigarette-forum.com/forum/tips-tricks/5828-anyone-have-idea-how-label-carts.html

 

[oldtechno]

I don't recommend tape. I marked my atomizers with it (to line them up properly on this JOYE 510)...sooner or later the juice gets under it and falls off.

 

[rjp44]

When taking off a cart I put the plastic cap that came on it back on and use a fine line sharpie to code it with a letter on the end.

 

[needvapor]

I use a paint pen.. you can find at staples and also craft stores.. the come silver gold and white. They do not rub off and this keeps me organized and helps me to keep refilling those carts with similair flacors.. if I add grape to say.. peach it would say pe+G
I keep fruit with fruit, coffee's with coffee's and tobacco's wt tobacco's mostly =)

 

[ProfessorDaffy]

OK, here is the latest issue I am trying to resolve. I now use carts, thanks to the eheim and ADM mods.

If I have 5-6 carts made up with different flavors. How can you identify which is which? Same goes with my 3ml sample bottles, I always mix them up. Anyone have a good labelling method???

I print little labels and tape them on the bottle. Scotch tape works best. I tried sticky colored labels that I wrote on, but there were hard to get off. The bottles don't seem sticky with tape.

I wouldn't focus on labeling the carts, I'd label the caps. Maybe color coded sticker cut to size. They're actually big enough to write a letter or two. It's easy if you're not a flavorholic like me. If you're only using a few flavors you can write on the top of the cap with a scripto. Or numbers if you're that organized!

Yeah, we're all rethinking carts thanks to the ADM. I just ordered 50 pen springs off e-bay. I've already killed one perfectly good pen! I've been using an ADM cart all day on my USB. You don't top off, you just fill'er up!

--Prof Daffy
P.S. Now I need to order some carts!

 

[kno]

the adm mod rocks my socks

i just write with sharpee on my bottles, i got like 50 of them from usplastics for about 15 bucks

 

[Cherice]

I use a Dymo labeler (black tape with white text). Then a little piece of electrical tape to make sure the end of the label stays down. Using the smallest font, I can fit the entire name of the juice on there.

 

[abhowe]

I use a Brother Label Maker and 1/4 inch tape..... Works great, but a little costly..... 39 USD for label maker and 18 for small spool of tape..... All different colors.....

 

[Winace]

I print little labels and tape them on the bottle. Scotch tape works best. I tried sticky colored labels that I wrote on, but there were hard to get off. The bottles don't seem sticky with tape.

I wouldn't focus on labeling the carts, I'd label the caps. Maybe color coded sticker cut to size. They're actually big enough to write a letter or two. It's easy if you're not a flavorholic like me. If you're only using a few flavors you can write on the top of the cap with a scripto. Or numbers if you're that organized!

Yeah, we're all rethinking carts thanks to the ADM. I just ordered 50 pen springs off e-bay. I've already killed one perfectly good pen! I've been using an ADM cart all day on my USB. You don't top off, you just fill'er up!

--Prof Daffy
P.S. Now I need to order some carts!

I am liking this idea. I can load 5-6 carts in one of my hand sanitizer PV cases (Cheap 1.00 case, works great) and code the caps.

The ADM mod has most likely saved my vaping experience. It was getting pretty frustrating. Cool thing is, every hit I take that looses throat hit, or has decreased flavor, is because the cart is empty, no other reason. Now, to get me a passthrough and the 10 pack of batteries and attys from health cabin! I am down to my last atty and waiting for payday!

 

[Brachinus]

If you're using relatively common flavors, you can buy labels for them fairly cheap (under $5 shipped for a set that includes 3 of each flavor): E-Cig Labels > Cart Labelz > Tasdad Design

 

[Luv2CUSmile]

Just get a hole punch and a sheet of sticky labels...
you can use mailing labels, name tag size, file folder labels, etc...
they come in various colors too...
punch the holes out before taking off sticky backing or writing on it...
punch a lot of them- then label them w/ a Cap letter of flavor, or whatever you want to distinguish which flavor is which... make a code... whatever...
Then put the little punched stickies on the tops of your plug caps for your carts... you can change them when you change flavors... you can also mark them when they need refilling- (again whatever mark you want to use)
and removing them if you want to change will not leave a sticky residue on your e-cig or cart mouthpiece...
It works like a charm...

 

[Winace]

Just get a hole punch and a sheet of sticky labels...
you can use mailing labels, name tag size, file folder labels, etc...
they come in various colors too...
punch the holes out before taking off sticky backing or writing on it...
punch a lot of them- then label them w/ a Cap letter of flavor, or whatever you want to distinguish which flavor is which... make a code... whatever...
Then put the little punched stickies on the tops of your plug caps for your carts... you can change them when you change flavors... you can also mark them when they need refilling- (again whatever mark you want to use)
and removing them if you want to change will not leave a sticky residue on your e-cig or cart mouthpiece...
It works like a charm...

Awesome idea! I have a huge roll of colored stickers, never even thought of hole punching them! Thanks!

 

[ProfessorDaffy]

Just get a hole punch and a sheet of sticky labels...
you can use mailing labels, name tag size, file folder labels, etc...
they come in various colors too...
punch the holes out before taking off sticky backing or writing on it...
punch a lot of them- then label them w/ a Cap letter of flavor, or whatever you want to distinguish which flavor is which... make a code... whatever...
Then put the little punched stickies on the tops of your plug caps for your carts... you can change them when you change flavors... you can also mark them when they need refilling- (again whatever mark you want to use)
and removing them if you want to change will not leave a sticky residue on your e-cig or cart mouthpiece...
It works like a charm...

Okay, you get extra points for that one. Very clever idea.

--Prof Daffy
P.S. Yes, Virginia, everything can be modified.