Limitless single coil build for Stretchpants

[FlyingV]

#1 Start by putting out these items, plus a scissors for cutting the cotton:

#2 Take the top cap off:

#3 Take it apart to this point:

#4 Loosen the top screws, do not drop them as they will gone forevermore:

#5 Put in your premade coil and tighten said screws. You don't want it to touch the center, nor stick out very far:

#6 Cut off the excess little coil legs sticking out the other side:

#7 Use the screwdriver to straighten out the coil:

#8 It's ready for the cotton now:

#9 Put it on your Radius and hit the button to make sure your coil is the right ohms:

#10 Cut a strip of your cotton:

#11 Twist the end so that it will go through your coil:

#12 Feed the end through your coil:

#13 Pull it through half way:

#14 Tuck the ends into the glass, keeping the cotton in the metal grooves:

#15 Put the silver ring back on:

#16 Press the plastic piece in the open grooves:

#17 Put the next piece on:

#18 Put the top cap and drip tip adapter on:

#19 Slide the pretty part up to fill it through the filling port:

#20 Turn the black top cap to adjust the airflow:

Vape. Let me know if you need me to email the bigger pics.

 

[stretchpants]

I'm on step 3 and only have 3 pieces. I don't have the piece that's right out front of all of them in the pic..

 

[stretchpants]

Step 5..How does the coil go on? There's a bunch of holes.Which ones for a single build?

 

[stretchpants]

I have really fine wire and it's shorter than what they sent.Will it even work? It looks much smaller than what they sent.Should I put in what they sent? I'm not sure how it should look when it's completed.

 

[FlyingV]

The top holes, under the blue screws are the easiest. You have the parts, honest. Keep taking stuff apart.

Let me know how you're doing!