Loki Lab Pyrex Tanks and Pro Rings

[SoCalCraig]

The Odin will be released in April. It's a 22mm rda thats using a new deck method for easier building with AFC.

The Borr is also a rda for dual/quad coils and will be sized for a few 26650 mods with a new deck style different from the Odin, again for easier builds. It will be made in small runs with the first batch due out late April/Early May.

The Gungnir is our first 22mm mod made of stainless steel and will be limited to 100 sets. Sets including:
Slim flat top cap and hybrid adapter for 510 connection.
All three tubes, 350, 490/500 & 650 and ofc the button.

I will release pictures when we're closer to their releases.



Sent from my SCH-I605 using Tapatalk

 

[VAPlN']

Please do. I have a couple of friends that are interested and I will be placing an order too.

The Odin will be released in April. It's a 22mm RDA thats using a new deck method for easier building with AFC.

The Borr is also a RDA for dual/quad coils and will be sized for a few 26650 mods with a new deck style different from the Odin, again for easier builds. It will be made in small runs with the first batch due out late April/Early May.

The Gungnir is our first 22mm mod made of stainless steel and will be limited to 100 sets. Sets including:
Slim flat top cap and hybrid adapter for 510 connection.
All three tubes, 350, 490/500 & 650 and ofc the button.

I will release pictures when we're closer to their releases.



Sent from my SCH-I605 using Tapatalk

 

[VAPlN']

Craig:

Just wanted to check in on the Odin and the Gungnir release dates. Any updates? I have a couple of friends that are holding off on buying new RBA's because I ranted to them about how much I enjoy the Omega. They won't forgive me, if they miss out on the first batch of Odin's. I am also sitting on my urge to buy a new mech mod. I want to check out the Gungnir first.

 

[SoCalCraig]

Craig:

Just wanted to check in on the Odin and the Gungnir release dates. Any updates? I have a couple of friends that are holding off on buying new RBA's because I ranted to them about how much I enjoy the Omega. They won't forgive me, if they miss out on the first batch of Odin's. I am also sitting on my urge to buy a new mech mod. I want to check out the Gungnir first.

The Odin is coming in the next 3 weeks..



Specs:
22mm 304 Stainless Steel
Dual or Single coil with AFC while only using 2 air holes in cap.
Injection Molded Peek insulators (Higher heat resistance then Delrin; Organic polymers that don't release toxic fumes)
Raw machined finish that closely resembles a Brushed finish
Small internal chamber above coils for increased flavor without sacrificing Vapor production with a deep juice well

Retail: $65.00

Borr a few weeks after the Odin.. The Gungnir is still a little while out as we're busy with the first 2.

More Borr and Gungnir specs to come at the appropriate time.

 

[VAPlN']

Craig:

I love your gear. Put me down for #001 right now! I'll take one, sight unseen. Love the Omega still. But, I'm buying one of everything you make. Just shoot me a PM with your paypal email and I'll send the money now. You can ship it whenever it is ready. I have a couple of friends that will be ordering one too. One of them borrowed my Omega and it took me a full week to get it back. He's ready to buy too. Maybe he'll keep his hands off my vapegear, once he finally gets one of his own?

Same goes for the Gungnir. Put me down for one of them too. I've held off on a new mech just for yours.

The Odin is coming in the next 3 weeks..

View attachment 327624

Specs:
22mm 304 Stainless Steel
Dual or Single coil with AFC while only using 2 air holes in cap.
Injection Molded Peek insulators (Higher heat resistance then Delrin; Organic polymers that don't release toxic fumes)
Raw machined finish that closely resembles a Brushed finish
Small internal chamber above coils for increased flavor without sacrificing Vapor production with a deep juice well

Retail: $65.00

Borr a few weeks after the Odin.. The Gungnir is still a little while out as we're busy with the first 2.

More Borr and Gungnir specs to come at the appropriate time.

 

[SoCalCraig]

To update our ProRing customers.. within the next 2 weeks we should have the Black Stainless steel ProRings and a limited number of Zombie finish ProRings. Our rings are currently in transit across the country for their beautification process by Dan at OCD mods. They will have a Cerakote finish that we have found will last and is 'tough as nails'.

I would say within the next 2 weeks they should be listed and I will inform customers on our mailing list/account holders on our site when they go live.

Happy vaping!

 

[SoCalCraig]

Coming to our site tomorrow



These are our stainless steel Pro-Rings with a Black Ceracokte and Zombie Cerakote finish. Done by Darren @ OCD Mods.

These will be available in limited quantities. Depending on customer feedback and how well they do we will probably do more again. This is a costly finish and these Rings have traveled to Florida and back.

SO in other words.. get them while you can!

 

[Cearamm]

Sick prorings! I have a couple and tge simply outshine all other prorings out there. Flushest fit everrrrr


Any updates on the Odin? Seems like things may have gotten delayed

 

[SoCalCraig]

Sick prorings! I have a couple and tge simply outshine all other prorings out there. Flushest fit everrrrr


Any updates on the Odin? Seems like things may have gotten delayed

Yes, slight delay. Injection molded Peek insulators came in and changes need to be made to center posts... :-/

Sent from my SCH-I605 using Tapatalk

 

[Father Luke]

Craig: Wut's the word on the Odin


I see. Of course.

 

[Cearamm]

I just saw lokilabs instagram for the Odin...the build deck is reminiscent of the Origen but more refined. Funny cuz i was about to get an origen but now ill prolly hold off for this one.

Any ETA on arrival, SoCalCraig?

 

[SoCalCraig]

I just saw lokilabs instagram for the Odin...the build deck is reminiscent of the Origen but more refined. Funny cuz i was about to get an origen but now ill prolly hold off for this one.

Any ETA on arrival, SoCalCraig?

Hi Cearamm, we should be opening up a limited pre-order on our website on the 6th with orders going out starting the 16th, right after we attend the Vape Summit in Las Vegas the 13-14th. We're raffling off a few special ones while we're there.

 

[eratikmind]

Another Odin inbound. Thanks, Craig.

 

[eratikmind]

Bump for router bits.

 

[super_X_drifter]

Subscribed. I was unaware of this thread. I'm glad I found it. Thanks Eratikmind

And here's a couple of build vids on the Odin.

http://youtu.be/iuO0JOvGukI

http://youtu.be/Uo4tbAVaZws

 

[Papa_Lazarou]

Yup - 'nother reonaut subscribed. Thanks for the tip, eratik.

 

[sb713]

Just saw this thread as well, subscribed

I bought a BF Odin last night, do i get a free drip tip as well ?

 

[PNW Rider]

Another from reoville. New home for Odin users... Here we are!

 

[SoCalCraig]

Just saw this thread as well, subscribed

I bought a BF Odin last night, do i get a free drip tip as well ?

Yes, each order will get a free DT. [emoji16]

 

[eratikmind]

Yay . . . Party at Craig's place, now.