Loki Lab Pyrex Tanks and Pro Rings

[tw33k]

I will ship to Australia but in the process of removing countires we'll no longer ship to due to respective countires postal systems failing worse then USPS.

I'm in the process of readding counties we havnt had issues with. Please bear with me.

No rush Craig. Thanks for letting me know.

 

[freedogg]

Reminds me of a Jack Nicholson movie. lol

 

[Rourke]

My guess is that the positive 8snt making contact. Seen this issue 3 times (one of my own as well)

I took the delrin cover off on the inside the Reo and loosened that threaded fill tube just the slightest bit. That fixed it for me. I have had zero leaking issues and the 2 customers that experienced this didnt as well.

I have been fiddling with it for a while now and still the coils still won't fire. I have loosened the tube a little but I am scared to do more since I only have the one Reo. Is there anything else I can try? Thanks.

 

[SoCalCraig]

I have been fiddling with it for a while now and still the coils still won't fire. I have loosened the tube a little but I am scared to do more since I only have the one Reo. Is there anything else I can try? Thanks.

Give me a few mins to pull my Reo apart to give a better idea.

 

[tw33k]

Thanks for fixing that Craig. Got my order in and now for my 2nd LP Reo an LP reo grand black wrinkle hammer tone I think I'll get

 

[caveat]

FYI there was one person getting hostile over there, and I've seen him do it elsewhere before, so I wouldn't trouble myself over it.

Some people just like to argue.

 

[tw33k]

Can we leave all that in the other thread? We don't need or want it in here

 

[freedogg]

Rourke...the tube is connected to the nipple which screws on to the 510. This is what they were talking about un- screwing a tad. See if you can push up on the nipple/510 a little bit. It's like pushing the 510 out the top of the mod.

 

[Rourke]

Rourke...the tube is connected to the nipple which screws on to the 510. This is what they were talking about un- screwing a tad. See if you can push up on the nipple/510 a little bit. It's like pushing the 510 out the top of the mod.

Do I need to take the tube off the nipple completely before pushing it up?

 

[freedogg]

Rourke are you using an o-ring between the atty and the REO??

 

[SoCalCraig]

I have been fiddling with it for a while now and still the coils still won't fire. I have loosened the tube a little but I am scared to do more since I only have the one Reo. Is there anything else I can try? Thanks.

Ok.. in the picture I attached look in the red circle.. thats the positive pin and feed tube. Its threaded on like a nut. Inside the top of the 510 it has a slot for a screw driver if necessary to stop it from spinning. My guess is its just a tad tight.

Give that little piece an adjustment and loosen it ever so slightly.

This was an issue I personally had and 2 Odin customers had the same with brand new Reos. They were really tight which compresses the depth of the 510.

The design of the Odins 510 was to make it a little shorter then most and to have a positive nipple to better work with hybrid adapters on tube mods and not short out. It works great but on none adjustable 510s it can have an issue.

Hope this helps!

 

[caveat]

Rourke...the tube is connected to the nipple which screws on to the 510. This is what they were talking about un- screwing a tad. See if you can push up on the nipple/510 a little bit. It's like pushing the 510 out the top of the mod.

I'm having a similar issue with my mini. Not Odin related, but I'm wondering if the last atty I put on there was too long and I managed to push the 510 in a bit.

My Odin still works fine on the mini but my Cyclone and Divo will fire, but just barely and don't really produce much vapor.

 

[freedogg]

You shouldn't need to. Try small needle nose pliers or something similar right below the firing pin on the tube. In your pic it is between the black delryn and the firing pin. It won't take much.

Do I need to take the tube off the nipple completely before pushing it up?

 

[Rourke]

Rourke are you using an o-ring between the atty and the REO??[/QUO

No not yet.

 

[RobinBanks]

Craig. My 2nd Odin arrived today. Thank you so much for the screws and the stub - extremely generous!!

Now Rob's site is up and I'm gonna go order my second LP to match my 2nd Odin!

 

[freedogg]

In Craig's pic, that's where I am talking about. Try what I said 1st and see if it works, if not take it apart and loosen the nipple a tad. A lot of times you can push it up a bit without taking it apart.

 

[Rourke]

It worked. Thanks so much guys.

 

[freedogg]

Did you just push it up a bit or did you unscrew it some??

 

[SoCalCraig]

It worked. Thanks so much guys.

Oh, I was personally in your shoes before. I was so wound up with frustration. Lol

Glad its working now and hope you enjoy the Odin.

 

[freedogg]

Kind of ironic that Craig can't talk on the REO thread and then helps someone fix their REO on the his (Odin) thread!!

My hat's off to you Craig!!