Looking for a big tank 7ml or so

[young gotti]

I pretty much have basic set ups anymore, I don't get fancy but I'm looking for a rebuildable tank, with a large capacity

I'm currently using a hypertank, yes still a hypertank and I rebuild the protank heads in 2 minutes, also have 2 subtank plus's.....basically looking for something that has a deck similar to a subtank or a kayfun but that holds a good amount of juice, to me the little 2.7ml and even 5ml are kind of a waste

is there anything out there that fits this description, I don't' want to have to re buy heads all the time, so anything that's fairly easy to rebuild, I've had trouble rebuilding vertical heads on some tanks as I never get a quality vape

 

[roxynoodle]

So you're a mouth to lung guy?

Big German?
Flash e Vapor with extension?

 

[young gotti]

So you're a mouth to lung guy?

Big German?
Flash e Vapor with extension?

yes mouth to lung

big german looks dual coil, not a fan of that....flash e might be good, i'll have to do more digging to find an extension and clear window

 

[roxynoodle]

The BG might be dual or single. I'm not sure because I don't have one.

@ccwaters I think does.

 

[jmarkus]

tobeco makes a great version of ks rta which holds 7ml. i believe theres a tank replacement you can find somewhere that holds up to 8 or 9ml. small form factor and nice on a box mod.

KS RTA TOBECO CLONE REBUILDABLE TANK ATOMIZER

 

[Shawn Hoefer]

There's the 26650. Sized Kayfun Lite models out there. Had one and enjoyed it. Holds 10 ml, but looks kinda oddish on smaller mods.

Sent from my SAMSUNG-SM-N910A using Tapatalk

 

[Mark1963]

to me the little 2.7ml and even 5ml are kind of a waste

is there anything out there that fits this description, I don't' want to have to re buy heads all the time, so anything that's fairly easy to rebuild, I've had trouble rebuilding vertical heads on some tanks as I never get a quality vape

Search for the Big Buddha on here and the Buddha Evil Eye. The former is 10ML and the latter is 8ML. I have both. The Evil Eye has a better air flow.

 

[Hightech Redneck]

Look up the vcmt from vaperz cloud. Haven't heard a lot but looks interesting and is 11ml. Cost a bit but been curious about it.

 

[ccwaters]

The BG might be dual or single. I'm not sure because I don't have one.

@ccwaters I think does.

Yes the Big German will do Single coil or dual, they provide you with grub screws to block the second side if that is your preference. It is actually a pretty nice atomizer which performs very well. Has a Juice flow control, airflow goes from fairly open to 99.9 closed. Builds pretty easily in both single and dual coil mode. Todd does a pretty good review of it. Only real drawback is it is fairly heavy. You can also get a Nano tank/chimney which hold about 5ml with a fairly reduced size/weight.

I would run away from the larger Kayfun clones, I have a couple versions and would not recommend. The Big Buddha is native dual coil, but you can do a fairly OK single build in it, made well, but the Glass is very fragile on it, I suspect the Evil Eye is of similar design/issues but don't have one. Not a fan of the Big Buddha. On the positive side for the Big Buddha I've seen it close out price from multiple sources for $5.00

The Tobeco KS is a great little atomizer with big capacity for the size of it, good performance as well. Only issue can be the small boxish design may not be for everyone.

Of the atomizers mentioned so far I would tend to favor the Flash E, or the Tobeco KS. MTL being a requirement the others are not so suitable. Many really like the Flash V3, easy build, good access to the build without emptying tank.

Going to toss the Kayfun 4 into the mix, you can add long mode kit which bumps juice capacity to about 6.5ml, easy to build, single coil native, great flavor, MTL friendly. Can access build without emptying tank. Clones can be had pretty inexpensively now days, I would suggest the Tobeco being the only clone to consider should be able to find for under $20, though I recently bought a few for $4.00 close out. The tank extension can be purchased for under $5.00 from fasttech, or multiple US sources under $20. Unfortunately authentic KF4 is still pretty pricy.

Really isn't a big selection of atomizers any more which are MTL capable especially with the larger juice capacity.

 

[young gotti]

lots of good information in here, thanks everyone.....I've been slacking on my vape products and just going with what I have, glad I could always come to ecf for information​

 

[EverPresentNoob]

Ohmega BFT. 30mm and 10ml capacity.

 

[Troll from behind]

How about regular Subtank?
It holds 7 ml of juice though the draw is very tight.
You need to get the new Plus rba though since the one it comes with ain't that great unless there's a newer version of Subtank.

 

[ccwaters]

How about regular Subtank?
It holds 7 ml of juice though the draw is very tight.
You need to get the new Plus rba though since the one it comes with ain't that great unless there's a newer version of Subtank.

Even at the tightest airflow I'd call it fairly restricted lung hit. The new RBA/RBA+ from the STM will not fit the original Subtank. I'll also add the original Subtank was one of the most disappointing atomizers I've purchased. I used it for one tank, have not used it since. I've not tried the Subtank+, but would assume the air flow is less restrictive then the original.

 

[roxynoodle]

Ohmega BFT. 30mm and 10ml capacity.

No way is that a single coil m2l tank though If he wanted a cloud chucker this or the VCMT would be perfect.

 

[roxynoodle]

Reducing capacity a bit could give you these options:

UD Bellus at 5.1ml. Can be built single coil and airflow cut way down.

Focusecig HIGO at 6ml. Can be built single coil though you need to fill your unused wick slots with cotton/rayon. Bottom and side airflow which are adjustable and/or can be closed off. QC has been an issue though. If you get a good one, its a great tank. If not, I can help you with getting a replacement, but it will be delayed due to CNY. Perhaps next month a single coil wick ring may be available so you can do single coil without filling the slots.

OG Lemo or Lemo2 at 5ml. The OG can be found for $15 now and airflow can be shut down very tight.

Erlkonigin. 6ml with poly or glass tank. Metal tank can take it to 8-9ml capacity. The authentic and accessories are pricey though. There is one in the classys today for $85 and has one of the metal tanks though I'm not sure which sized one it is. However, its at least 6ml capacity.

 

[350ZMO]

Some others.

L-R SKing, BT, CHA Chariot 26650, KF V4 Plus, Arnold, Wolverine.

SKing is not an RTA it is a glassomizer but does use Arctic coils, not the Turbo, the original Arctic. If you can rebuild coil cartridges the original Sunone is pretty standard. Holds 10ml has JFC and AFC, top or bottom fill.

Hotcig BT has a SS or plastic tank, JFC, AFC 10ml.

CHA Chariott 26650 is a coil cup design like the Rose or Bachelor with AFC and limited JFC, 7ml. Discontinued at FT.

KF V4 Plus aka Big or 26650 is just like a KF V4, 6ml.

The Arnold is a genesis style, not readily available, 6ml.

The Wolverine is 19ml. It does need modification for the chimney top tank to have a seal. Airflow in build area is parallel to build deck through side slots in a ceramic posipost insulator. Huge heavy chunk of SS. Discontinued at FT.

 

[EverPresentNoob]

No way is that a single coil m2l tank though If he wanted a cloud chucker this or the VCMT would be perfect.

Oops.. I missed "Single Coil".... Dont post with a pounding headache...

 

[young gotti]

How about regular Subtank?
It holds 7 ml of juice though the draw is very tight.
You need to get the new Plus rba though since the one it comes with ain't that great unless there's a newer version of Subtank.

I'm already using 2 subtank+, they work pretty good for me, looking for something replace the ancient hypertank

that sking glassomizer looks nice....are the article coil rebuilds a verticle coil? I can't seem to get verticle coils right

 

[350ZMO]

Yes standard vertical coil cartridge design. There is no RBA cartridge for the SKing or the Arctic that I am aware of. Also spare glass tanks don't seem to be available.

 

[Falconeer]

As an "off the wall" idea - have you considered squonking?