Looking for a new evod compatible tank

Status
Not open for further replies.

Infamshxr

Senior Member
Sep 17, 2015
74
24
37
If they COME WITH the tank, they usually fit well.

I thought you meant if you wanted to change out to a different drip tip that you like.

Oh, no. Just talking stock right now. If I buy a replacement drip tip, I'd probably go to my vape shop and pick something that fits well.

So, can the drip tips withstand a fall off a coffee table or is there a good chance it'll pop off. That's the only thing that worries me about tanks with removable drip tips
 

Infamshxr

Senior Member
Sep 17, 2015
74
24
37
Oooh! That clears it up. Ok. See, I was imagining you could fill those from the top or bottom since the both come off. That eases my mind way more then.

OK so, now the evod glass comes with a dual coil setup and I'm running 2.2ohm singles right now. I don't want to have to waste my coils and I heard lots of ppl say dual coils use more power and juice, which is a big con. But then I heard I can use my single coils on it somehow, but also read I can't. Little confused there. Also, I do like the mpt2, and I would just go for that, but the evod glass just seems to be more durable looking due to the outer protection. But if I break my evod glass, can the glass be replaced like it can be on the mpt2?
 

runamok

Senior Member
ECF Veteran
Verified Member
Nov 27, 2014
152
7,043
Georgia
I have several protanks and mini protanks. If you want you can put mini tanks on pro afc's and vise versa. One nice thing is you can get replacement glass tanks for either size for around 2 to 5 $, even find colors. I don't remember where but I saw drip tip o-rings to snug up loose tips. Between the single and dual coils, I have both and don't see any difference in batt. life. As for breaking them, if you drop em they will break sooner or later. I made a couple of stands for my Provari's after knocking the top off a used one I got cheap. If you take a small piece of 2x6 and drill holes in it to fit close you can prevent drops. even keep vapes and juice together.
 

runamok

Senior Member
ECF Veteran
Verified Member
Nov 27, 2014
152
7,043
Georgia
Might be good to just get yourself a mini pro 2 and an Areotank mini and try them side by side to see what you like. just get a mini air flow control for the mini pt2 so you get a comparison of draw and flavor. In the end it's all about what you like. Your new and need to vape something to see how it fit's you. I bought myself a vision spinner and liked it till I learned more, I still use to spinner now and then but I've moved on and up. I still have 5 650 ma ego's with mpt2's that are great small shirt pocket vapes ans just picked up 2 joytech ego 1's with an Gs air ms tank, another smallish pocket vape. And I'm vapeing an SX mini w/ a Sophia in a Ibtanked right now . So your going to have to test drive a lot of stuff to find your match. I have 3 right now that are my go to sets right now, A Ti provari mini w/ GS air ms, A Reo grand w/ a RM2 and my mini SX w/ Sophia. and I switch between the bout every 15 mins. all different juice and levels of vape. All running low watts. Have fun cause there are tons of combos. and with an old koozi and duct tape you can pad anything to take a fall.
 
Last edited:

Infamshxr

Senior Member
Sep 17, 2015
74
24
37
I'm just wanting to get something that performs real close to the og evod tank, but is more durable. I'm completely happy with just having the evod and nothing fancy. Using my coils on the evod glass just sounds like more of a pain then its worth so I would just end up buying new coils with it I think. So I guess what I'm asking is which is closest to the performance of the og evod and which one is more durable? Mpt2 or evod glass? Don't think I need anything special like the aerotanks, as cool as they are, $20 for the tank is more than what I want to spend, plus I'd have to buy all new coils as well.
 
Status
Not open for further replies.

Users who are viewing this thread