Looking for a tank the same diameter as the kGo battery

[subver]

Sorry if this has been asked before, but I couldn't find it.
I'm using kGo 1100mAh batteries with Boge LR Carto's. I'm looking for a tank, preferably the same diameter as the kGo battery, so it looks a littler nicer. I was looking at those 3ml JTanks, but they seem to be a bit fat.

I'm considering making my own, which I have no issues with, but if there is already a perfect sized tank then I will probably get that. Preferably a very high quality tank (I've seen some that slide off when lubed up with juice)

Thanks guys!

 

[9ball_AJ]

Sorry if this has been asked before, but I couldn't find it.
I'm using kGo 1100mAh batteries with Boge LR Carto's. I'm looking for a tank, preferably the same diameter as the kGo battery, so it looks a littler nicer. I was looking at those 3ml JTanks, but they seem to be a bit fat.

I'm considering making my own, which I have no issues with, but if there is already a perfect sized tank then I will probably get that. Preferably a very high quality tank (I've seen some that slide off when lubed up with juice)

Thanks guys!

Smoktek DCT small version should be about right. Here is a pic from the Vapor Kings Website.

This is the new Polypropylene tank that won't crack even if used with cinnamon or other acidic liquids. I have the 5ml version and they are a bit cheap looking, but they perform well. These are meant to be used with xl sized cartos, but you can cut the tube down pretty easily to fit standard cartos.

Here is the link from Vapor Kings: Smoktech Small Dual Coil Tank (DCT)

-AJ

 

[Scotay87]

Smoktek DCT small version should be about right. Here is a pic from the Vapor Kings Website.

This is the new Polypropylene tank that won't crack even if used with cinnamon or other acidic liquids. I have the 5ml version and they are a bit cheap looking, but they perform well. These are meant to be used with xl sized cartos, but you can cut the tube down pretty easily to fit standard cartos.

Here is the link from Vapor Kings: Smoktech Small Dual Coil Tank (DCT)

-AJ

What he said.... Mad Vapes has the same tank plastic or polished chrome and you can get one of these eGo Chrome Cone for the 3.5 mL Dual Coil Tank Cartromizer as well.... The collar covers the Kgo neck and will make the whole unit look sleeker...

 

[subver]

Awesome, thanks guys! And these tanks don't slide around? I just remember one review pbusardo did where some of the tanks would slide off the carto - that I do not want! Love that little collar, too - I would definitely get that as well

 

[Scotay87]

I have a chrome one and it is not slidy... If you have a big barrel drip tip or get one like a Cherry Vape Pawn or Ming that will solve most slidy issues if one occurs...

 

[9ball_AJ]

I haven't had any slide issues, but I also dont pick up my pv by the tank either. The o-ring on the bottom cap sits pretty tight to the carto, and it is a little bit tough to get the carto in the first time. This is a good sign that it will not be slidy. It will slide with enough force, and the o ring will wear down over time. The big barrel or cherry vape drip tip is a good recommendation. It would nice if they made a drip tip with a flange specifically designed for this type of tank, although I am not sure how well that would work either.

I also have a VPX Cartomator SS tank, and as it is very high quality, I could still pull it off the carto with enough force. I have just made it a habit to never pick up my PV by the tank. The only carto tank I know of that will never slide on you is a JonboyUSMC Lava Tank. They are extremely hard to get a hold of, and run about $45-55. They are the standard 3/4" diameter too, so not quite what you are looking for.

Good Luck!!

-AJ

 

[9ball_AJ]

Here is a better idea of what the small tank will look like on an ego with the thread cover designed for tanks. Once I get this bad boy cut down to fit a regular size carto it will be a perfect little stealthy tank setup:

I am going to email vapor kings, because the other tank I got (6ml version) from a co-op direct from Smok had a more frosted color to it, and I am sure it is polypropylene. This one looks more like polycarbonate to me.

This is what I expected the tube to look like:

I will post up their reply.

-AJ

 

[9ball_AJ]

Vapor Kings was super fast to respond:

Hi,

Thank you for your compliments and recommendations!

We were told that they are definitely polypro. I haven't used cinnamon or pineapple in mine personally but we've not had any reports of cracking. I've had several people inquire about that.

If you have any issues with it, please let us know.

Thanks
Rob

 

[subver]

Thanks for the photo ajohnson! Very nice indeed. I may have to go that route... just still slightly worried about sliding.. but maybe I will look into those bigger drip tips. Thanks!