looking for a tube mod

Status
Not open for further replies.

InTheShade

Vaping Master
ECF Veteran
Verified Member
Apr 26, 2013
4,122
4,884
South Texas
Also not too expensive means different things to different people. If you could tell us your budget it would be easier to recommend something.

If you could also say if you have batteries and a charger it would help narrow it down too - are you OK with a device that takes separate batteries and a charger? - because most tube mods do, so you would have to add about $25-30 for those items as well.
 

Jennyfromtheblock

Full Member
Jan 2, 2015
60
11
Ah, I see. How about the size then? Most tube mods are 22mm diameter. The Nautilus mini is around 19 or 20mm I believe. Is having a slightly bigger mod a problem or would you prefer a smaller battery like the EVOD?

slightly bigger is fine since I assume that will give me more 'power'. someone i met the other night suggested the vision spinner 2 but after doing a little research I'm hearing that it is not that great?
 

chomper33

Senior Member
Sep 22, 2014
111
107
USA
i'm also learning through this site that there are ones that you can buy that you just replace the battery so you have it a lot longer then ones like the EVOD which just stop working after time.. are these really expensive?

The Vamo v5 is such a device. It is very tall, but you can use it with different size batteries to make it shorter. Here are a couple pics of mine:
In 18650 battery size-
20150104_013634.jpg
In 18350 battery size-
20150104_013513.jpg

These have all the power you will ever need for any Nautilus clearomizer.
 

InTheShade

Vaping Master
ECF Veteran
Verified Member
Apr 26, 2013
4,122
4,884
South Texas
Caution - long post. TL : DR - main differences between all the different types of mod and APV that I could think of.

There are fixed voltage ego style batteries that are similar to your EVOD. These are good batteries to simply screw something in to and vape. You have no control over the power being delivered to your topper though and so you have to be careful as to the resistance of the coil head you use.

Then there are VV/VW (variable voltage / variable wattage) ego style batteries like the Spinner II and the Joye Twist. These both have built in batteries that range from 200mAh (barely an hour of normal vaping time) all the way up to 2000mAh which should last all but the heaviest vaper a full day. They also mostly charge with a screw in charger that connects to the top of the battery, where the topper screws in. They often do not have screens but you can change the power delivered to the topper with a simple twist of a dial on the bottom of the battery. I would call these beginner to intermediate devices. (although there are some veterans that still use them because they do a great job in a small form)

Then you have box mods that have a built in battery, like the MVP2, iStick and a few others. These usually have a larger battery than the ego type batteries. The iStick is really small even though it's a box - no taller than a bic lighter and about twice as wide. These charge with a micro USB that connects to the base of the battery usually allowing you to continue to vape while they charge. Again, you can change the power output on these devices and almost everyone can find a good vape with them.

There are some of the higher watt box mods that take replaceable batteries. This means you have to remove the batteries and put them in your own charger to charge. Something like a Sigelei 100w or similar is in this catagory and they have a lot of power. Just to confuse the issue there are also box mods that take replaceable batteries that you can charge with a micro USB charger - think IPV type box mods. I would call these intermediate to advanced devices although a beginner can use them successfully with some reading and education about them and how to use them safely.

Then there are mechanical tubes. These have no circuit board on them and are powered with a replaceable battery. You have no real control over the power delivered to your device other than changing the resistance of the topper. I would consider these intermediate to advanced devices as it usually means using a topper that you have to build the coil yourself - although you can screw in a Nautilus and get a reasonable vape. Of course, you also need a separate charger and batteries for these devices. Mechanical boxes are the same theory as the tube mechanical - but in a box shape. Something like a REO would fall in to this catagory. Mechanical devices need to be used in a safe manner as you can get yourself in trouble quickly if you don't build your coil correctly or use the wrong type of battery. Further reading and learning will be necessary for most people before jumping in to mech(anical)s Some examples are Nemisis, SMPL, Panzer etc.

Finally there are regulated tubes that almost always take replaceable batteries and have circuitry that allows you to select the power being delivered to your device. They almost always have screens that give you information about the vape you are getting. Some examples are Vamo, Innokin VV3 / VV4, eVic, Provari etc.


I'm sure I have forgotten some important details and will leave it to other to pick holes / suggest other devices / set me right :D
 
Last edited:

Jennyfromtheblock

Full Member
Jan 2, 2015
60
11
The Vamo v5 is such a device. It is very tall, but you can use it with different size batteries to make it shorter. Here are a couple pics of mine:
In 18650 battery size-
View attachment 401080
In 18350 battery size-
View attachment 401081

These have all the power you will ever need for any Nautilus clearomizer.

what kind of batteries do you use?
 
Status
Not open for further replies.

Users who are viewing this thread