Looking for info on the best mod for an Aspire Atlantis!!

[Bmanctree]

Hey guys,
I'm starting to upgrade from my Kanger Aerotank and Itaste2.0 to the Aspire Atlantis. Would someone point me into a good direction for a good mod that i can use in the long run with that tank and possibly others after without paying an arm and a leg??? Any advice is helpful and appreciated!!!!!

 

[InTheShade]

Take your pick from literally hundreds out there. Sigelei, IPV, iStick 30 / 50W, SX, etc.

Main thing you will need is a device that fires down to 0.5 ohms (or lower if possible) and at least 30 watts.

Aspire make a couple of batteries 'designed' to be used with the Atlantis, the CF Mod and the CF sub ohm. They are usually around $30

Like I said though, there are loads of devices out there - have a look around Variable Voltage APV Discussion for more ideas. When you find something you like, do a youtube search for reviews to help you decide.

Finally, if you have a local B&M you can visit, it's often easier when you can see, hold and use different batteries before making your mind up.

 

[sparkky1]

Eleaf iStick 30W Battery - Eciggity

 

[inspects]

Eleaf iStick 30W Battery - Eciggity

Good inexpensive battery.

 

[Bmanctree]

I was also thinking that i would need to be able to charge the mod with usb instead of charging the batteries seperately. Is that possible?

 

[hooplah101]

I was also thinking that i would need to be able to charge the mod with usb instead of charging the batteries seperately. Is that possible?

I have an Atlantis with the cf mod, its unregulated and takes 18650 batteries, its essentially a fancy mech, I tried out a box mod that fires hotter than the 35 w my cf puts out, and it kinda hit real hot at anything above 35w so if your looking to get in inexpensively then grab a mech and some high quality batteries(to preventing venting with subohm) and bobs your uncle and fannys your aunt, your done.

 

[sparkky1]

USB wall adapter yes ...........

 

[DiAmoroso]

If you want to charge it with USB, you should consider the Aspire CF Sub Ohm battery. It's just like a more powerful eGo, made specifically to work with the Atlantis. I have one, it's solidly built, reliable, and extremely easy to use.

 

[Bmanctree]

But, will i be able to use in the long run when other tanks come out that are better than the atlantis?

 

[Bunnykiller]

get an Otto Carver hand engraved from Vaperev

 

[Bmanctree]

Is a Sigelei 150 good for an atlantis and future tanks??

 

[Wissel Joe]

I was just a the local vape shop with a friend of mine I needed drip tips, he ended up buying a istick30 and a atlantis,
the lady working there filled the tank on the atlantis for him with the same flavor I use, while he was paying I took it turned it up to 22watts
I was doing lung hits although it hit pretty good I was expecting more and the flavor was way different than my set up actually taste better
in my set up. for what he spent. im happy with my istick20 and aerotank giant.

 

[Andy Leichty]

I have a sigelei 100 watt works great with everything.

 

[InTheShade]

I have a sigelei 100 watt works great with everything.

Except small hands

I'm half kidding, I have one and use it a lot with my original Subtank. Great device, great vape.

But it is rather big, and sharp too. Oh, and heavy. I always load it in my wife's purse when we are going to dinner and she always forgets and then mutters something about her bag being heavy...

 

[RamShot Rowdy]

I second the iStick 50 watt, if it lives up to the specs, it should be a great device for around $50.

 

[FFMedic22]

Is a Sigelei 150 good for an atlantis and future tanks??

would work great with future tanks, but if your wanting something cheaper they are pre-ordering the IPV mini V2 for around $79 it goes to 70w and you can charge via usb.

 

[RobJohn2188]

I was looking into the Atlantis and cf mod. Do you have any issues with it? And bows the flavor/cloud production?

 

[hooplah101]

I was looking into the Atlantis and cf mod. Do you have any issues with it? And bows the flavor/cloud production?

My exact setup and I love it!

 

[RobJohn2188]

That's good I went ahead and got it. Now I just have to find some batteries. What pg/vg blend do you find works best?