Looking for rebuildables

[rick.mtn.view.ca]

I purchased a Russian 91% clone from Tobeco about 5 weeks ago and I'm still using the first of the 3 coils that came in the package. 35 bucks from Venerable vaping in New York. I'm complete pleased with this setup. The coils are micro in size and are not touching. They measure out at 2.2 ohms and I vape between 7-10 watts on a Vaporshark. I wick with cotton(less is more) and I can vape clouds if I choose. For me, the search is over!

 

[Tugg n chase]

I personally wouldn't go with the A7. There are much better dripper options out there for the same or less cost. My personal preference is the Helios and there are some decent clones of it out there. As far as rebuildable tanks I recommend the Taifun gt

 

[ZeroOhms]

I have the Lambo 4.0 (Chrome Lambo 4.0 with Resistance Checker | Variable Voltage Ecig) with the new kanger aero tank. I dont know if i got a faulty aero tank or what but the tank doesnt produce nearly as much vapor than the regular pro tank 3. Any suggestions?
-So this leads to the real question, if i cant fix the aero tank then im gunna end up just getting a new tank, most likely a rebuildable. I use PG 20%-VG 80% so i need a tank that can use that high of VG without any problems.
-Thinking of getting an A7 Rebuildable (A7 Rebuildable Atomizer - Chrome)

Try taking the flavor wicks out.

As for RDA, A7 seem too narrow for first build. IGO-W has dual post for dual coil. Cheap yet solid product. Wide open deck for easy build.

 

[ZeroOhms]

Oh, forgot to add. Make sure the voltage is high enough. If you are using the stock dual coil, you might have to crank above 4v.

 

[dice57]

Most rba's will wick high VG juice quite well, it's more of getting your build and wicking correct for the rba used. I mix my juice at 70-80% VG, and all my rba's handle high VG at 20+ watts without a problem. My first rba was the Russian, a great rba and is still in my daily rotation. The flash-e-Vapor V2 is probably my favorite in my collection, I have both the Authentic flashi from Germany, and the Fasttech clone. Both produce a great flavorful vape, and vape great at standard or sub ohm builds. The one from Fasttech was only $25 and can highly recommend it. While not a exact 1:1 clone, it is well built and vapes as well as the Authentic version. Only thing I had to do is drill out the air adjust screw to 1/16", to get a better air flow. I also have the Aqua and the Taifun GS, both are great, the Aqua is a dual coil rba, and works quite well at low sub ohm builds.

For a first rba would recommend the flashi first over the Russian/kayfun, just because it is much easier to build and is a solid performer, although the Russian/kafun style rba would be a great choice too. The Aqua is a bit more advanced and wouldn't be a great choice as ones first rba, the Taifun GS is similar to the flashi but on a smaller scale.

Lots of fine rba's to choose from, find the style you like best and go with that.

Vape long and Prosper!!!