Looking for ultra feminine tanks for my provari
- Thread starter Sweetab
- Start date
- th_trl_thread_readers 0
-
- Tags
- protank provari smoktek vapor beast
- Status
I do like the drip tips on these. Are they all from Hoosier vapes? Do you pick each piece individually? What size works best for a provari mini?
This was an option you could choose from on the IBTanked website, mmmm maybe a year ago. They do custom paint jobs. I'm certain you could ask them could they do the "Rio Carnival" tank they would know exactly what you meant. To be sure, save the pic and send it to them via email.
I have one of these tanks, and got blue caps with silver glitter applied, with a clearcoat protective layer on top of that.
Last edited:
Hello,
You may like these.
Bedazzle Tubes - Bedazzle Glass Tubes
complete set ups.
Aluminus Tanks - Bedazzle Tubes
Upon second glanc, I do really like the alumis. How does it work? Just order the color? Does it come with punched cartons? I have never used cartons before. I have only used vivi novas, and protank. How do these tanks worl. Do I need extra supplies? Thanks.
There is a similar tank called the "Raven" or sometimes "Raven's Nest/Phoenix Raven's Nest," but the tube is plastic, not glass. I've seen them for a couple of dollars less, but Vapor Beast has free shipping.
http://www.vaporbeast.com/category-s/1886.htm
There's also a BCC that's kind of similar, I'll be back when I remember more about it.
ETA: This it the one I was thinking of that looks sort of similar:
$7.19 K2 E-Cigarette Round Mouth Atomizer (3.5mL) - silver / 2.4ohm at FastTech - Worldwide Free Shipping
It's a BCC, but I don't know if it will take Protank heads. I believe it is also plastic.
Last edited:
They come with a pre-punched carto already installed. The carto has to be filled(best if already installed in the tank) by dripping into the filler about 20 drops of your liquid, when saturated it will look like a slushy. Then fill the tank with your ejuice and put the top back on. If you get liquid down the center hole(air supply) then just take a tissue and put at the connection end, gently blow out any excess and put it on your battery. On you second, third etc refill of the tank, no need to refill the carto as it is already primed. Extra supplies can be found at mtbakervapor. They have pre-punched cartos 5 in a box for $5.99 with a 10% discount code use 'ecf' without the quotes. If so inclined, you can pick a Standard Resistance(SR3.0) or Low Resistance(LR2.0). Stainless are always better because the black ones have a wrap on them that is black and a pain to get off. http://www.mtbakervapor.com/cartomizers/boge-5pc-sr-510-cartomizer-pre-punched-2-holes/
Hope this helps.
Last edited:
The tanks from Hoosier Vapes are the same "style" tank as Bedazzled. Top cap and drip tip are a single piece. To fill the tank, you twist the drip tip/top cap off of the tube, and after filling you twist the top cap back on. I can't do a direct link to the website, just Google "Hoosier Vapes". The tanks come default with a plastic tube but quartz glass is available as an add on. Only one diameter, no choice there. You can get the tube in 35mm or 45mm length depending upon the carto length you use.
Remember, I used a Phiniac pyrex tube in the below Hoosier Vapes tank. Caps and tube are from two different vendors.
Remember, I used a Phiniac pyrex tube in the below Hoosier Vapes tank. Caps and tube are from two different vendors.
Only pic I have of this tank on my Provari is middle pic above. Only one diameter available, but 35 or 45mm length. Mine is 45mm length in above pic.Sweetab said:
Last edited:
You can get metal sleeves for the Vivi Nova and Protanks come in colors.
Never mind, I see retired1 already linked to it.
Last edited:
http://www.e-cigarette-forum.com/fo...-5-baditudes-cartomizer-tank-setup-guide.html
This is how I was doing it before I even came around ECF, and this is how I will continue to do it. I have problems with wicking with boge cartomizers. I mostly use smoktek. I don't use anything with more than 50% PG content. Smoktek cartomizers will be cheaper on smoktek.com I didn't see any box deals with them on Mt. Baker.
This is how I was doing it before I even came around ECF, and this is how I will continue to do it. I have problems with wicking with boge cartomizers. I mostly use smoktek. I don't use anything with more than 50% PG content. Smoktek cartomizers will be cheaper on smoktek.com I didn't see any box deals with them on Mt. Baker.
Hey Bad,
I had tried Bella's but they always leaked on me. Soooo, after your wonderful idea of using different tubes from other sources, I got my bella's out and mixed and matched with what I already had. And now they work great. I wanted to thank you for that. I had thought my bella's would forever be in the drawer. Not only did they fit on some of the Phinaic tubes but also on the bedazzled aluminus also.(same diameter).
Thanks again.
Not sure what you mean by box deals. the link I posted were for one box of 5 already punched for 5.99 and with the discount that comes to 5.40 a box. That is the cheapest punched ones I have come across. Most of the punched cartos I have seen are for singles for 2.99 a piece.
edit..to your link..this is the way I do it also, but all of my bottles have a luger cap that allows a needle(16-18 guage) to be attached. Its quick and easy to fill the carto and the wait time isn't as long to absorb the liquid.
Last edited:
I posted that in regards to smoktek, not boge. If I could use boge, I probably wouldn't have had any input.
I use to not use a syringe, but essentially, I used the same principle..don't get liquid in the center hole. If I had time to just drop it in until the cartomizer was fully primed, I would, but a needle does work well for impatient people like me.
I use to not use a syringe, but essentially, I used the same principle..don't get liquid in the center hole. If I had time to just drop it in until the cartomizer was fully primed, I would, but a needle does work well for impatient people like me.
There is a similar tank called the "Raven" or sometimes "Raven's Nest/Phoenix Raven's Nest," but the tube is plastic, not glass. I've seen them for a couple of dollars less, but Vapor Beast has free shipping.
http://www.vaporbeast.com/category-s/1886.htm
There's also a BCC that's kind of similar, I'll be back when I remember more about it.
ETA: This it the one I was thinking of that looks sort of similar:
$7.19 K2 E-Cigarette Round Mouth Atomizer (3.5mL) - silver / 2.4ohm at FastTech - Worldwide Free Shipping
It's a BCC, but I don't know if it will take Protank heads. I believe it is also plastic.
I love this one! Just ordered from fast tech.
- Status
