looking to get a rebuildable

[saqueeb]

hello, I am looking to get some sort of tank rebuildable so i can get larger vapes (clouds).

i currently have a MVP V2 with the i clear 30, evod2, and aspire bdc. i want to stick withthe MVP mod for now as it is just very convenient.

i want to be able to make my own coils w cotton, i have 32ga kanthol, and cotton already. just not sure what to buy to use it with???


What i would like it to have:
i don't want to drip, i like having a tank that i can just pull a hit on whenever i want.
i don't want it to leak, as it lives in my pocket on the MVP V2.
i also want to stay under $50.00
i want to be able to build easily(not cramped quarters, to tiny)
it would be nice if it is not to large since it will be in my pocket.
i prefer a medium warm to cool vape

HAS to be able to handel all E-liquids (so i would guess glass or all metal)


looking forward to your suggestions
Thank you

 

[Cool-breeze]

Welcome, I'll toss in my two cents for ya as I'm sure others will as well. I'd say a kayfun 3.1 clone is what you're after. Its rebuildable, it comes with two different mid tank aspects one of which is metal and won't crack, when built and filled properly won't leak. If built/ filled wrong it will leak like a fresh wound. Its right at 50 depending on the site. I'm pretty sure fast tech has them for much less. I hate fast tech. I mean really hate. Like make you want to jump up and down and punch the website in the face kinda hate... You get my point. Its a tad big but if you want space to build on and "not cramped quarters" then its gotta have some size too it. Can't be bigger on the inside than on the outside unless you're the doctor. You get bonus points if you get that reference. Lastly its a cool vape as the coil is down a ways. I'd also suggest getting an ego/510 adapter. I just read another post about someone using the kf3.1 on an mvp and it pushed the firing pin down. The adapter resolves that. IF you get the KF3.1 watch youtube and read here. It works great and is pretty easy once you figure it out BUT wicking it is a tricky process. Tricky may not be the right word but too little or to much cotton and it won't perform as well. Solution: do not fill it slap full of liquid until you know its built right. Money says you'll place to much cotton, choking the coil, giving a dry hit then sit there thinking how do I get to the coil to fix it without loosing all that liquid.

 

[saqueeb]

Welcome, I'll toss in my two cents for ya as I'm sure others will as well. I'd say a kayfun 3.1 clone is what you're after. Its rebuildable, it comes with two different mid tank aspects one of which is metal and won't crack, when built and filled properly won't leak. If built/ filled wrong it will leak like a fresh wound. Its right at 50 depending on the site. I'm pretty sure fast tech has them for much less. I hate fast tech. I mean really hate. Like make you want to jump up and down and punch the website in the face kinda hate... You get my point. Its a tad big but if you want space to build on and "not cramped quarters" then its gotta have some size too it. Can't be bigger on the inside than on the outside unless you're the doctor. You get bonus points if you get that reference. Lastly its a cool vape as the coil is down a ways. I'd also suggest getting an ego/510 adapter. I just read another post about someone using the kf3.1 on an mvp and it pushed the firing pin down. The adapter resolves that. IF you get the KF3.1 watch youtube and read here. It works great and is pretty easy once you figure it out BUT wicking it is a tricky process. Tricky may not be the right word but too little or to much cotton and it won't perform as well. Solution: do not fill it slap full of liquid until you know its built right. Money says you'll place to much cotton, choking the coil, giving a dry hit then sit there thinking how do I get to the coil to fix it without loosing all that liquid.

that does look like what I am after, but it is HUGE!! LOL!! diameter is fine, but i wonder if there are any shorter options.

also what is wrong W fast tech?? new to this so i really dont know.

thanks!

 

[Rodeorat]

What you want is the Kayfun Lite V2, adjustable airflow. One of the best vapes out there, easy to build, doesn't leak, can find for $35-$40.
(ehpro clone is probably best) 101vape.com

Fasttech is great. Just have to have patience as it takes a while to get your goods. You can use Paypal too.
Most of their items are knock-offs/clones, so be sure the Kayfun has good reviews so you know you're getting one of the good ones.
There ARE cheap knockoffs at FT that just suck.

 

[retic1959]

hello, I am looking to get some sort of tank rebuildable so i can get larger vapes (clouds).

i currently have a MVP V2 with the i clear 30, evod2, and aspire bdc. i want to stick withthe MVP mod for now as it is just very convenient.

i want to be able to make my own coils w cotton, i have 32ga kanthol, and cotton already. just not sure what to buy to use it with???


What i would like it to have:
i don't want to drip, i like having a tank that i can just pull a hit on whenever i want.
i don't want it to leak, as it lives in my pocket on the MVP V2.
i also want to stay under $50.00
i want to be able to build easily(not cramped quarters, to tiny)
it would be nice if it is not to large since it will be in my pocket.
i prefer a medium warm to cool vape

HAS to be able to handel all E-liquids (so i would guess glass or all metal)


looking forward to your suggestions
Thank you

Just want to let you know that a kayfun is one of the best RTA's on the market , that's rebuildable tanked atomiser . But a kayfun is not for cloud chasing , it's all about flavor chasing , a kayfun 3.1 is a flavor machine , if you want clouds you're gonna have to drip on a RDA built subohm on a mech and you're not ready for that . A kayfun will work fine on your MVP but you're gonna have to learn to rebuild and I suggest you get some 30ga wire unless you learn how to make twisted coils with the 32ga . I'll give you a link for one of the best clones available and the price includes shipping .
HCIGAR Kayfun 3.1 | Luxor Vapes

 

[Blackboar]

+1 for the Kayfun Lite Plus recommendation.

If you feel it's a bit too tall for you, you can also get a Nano kit for it. That basically takes out one of the tank sections in height and replaces the internal chimney with a shorter one that accommodates the missing tank section.

http://www.vividsmoke.com/kayfun-nano-body-kit.html

 

[saqueeb]

thanks guys, it looks like the kayfun lite is going to be the one! i'll order some 30ga wire as well, will i need/want ay other wire? i have 32ga, and i have cotton, and 2mm silica. I'd like to make one big order.

 

[BlownFuze]

Personally, I'd skip the 30ga and go straight to 28ga. I have 28ga for my kayfun and trident coils and 32ga for any twisted coils (have it from when I used to rebuild protank coils).

 

[zeroclue]

I got a kayfun 3.1 from FT, got some coloured tank sections, nano kit and custom top cap with a few drip tips too. They all fit perfectly, no problems with leaks etc and I can change it up if I get bored

(Kayfun was the one with the black box that comes with the mini screwdriver)

 

[ian91]

I use the MVP2 as well. Have just about all the bottom coil RBAs. I would go with a EHPro Kayfun Lite. It seems to fit nicely with the MVP. I vape it at 10W with a 1.5ohm build. I use AW30 and cotton. The 3.1 is nice but is a lot bigger than the lite.

 

[saqueeb]

Thanks guys I have ordered the ehpro kayfun lite. Should be here Saturday or Monday, as well as some 30ga and 28 ga kanthol.

 

[Cool-breeze]

You asked why I hate fast tech. Many ppl here use them and like them and I seem to be a minority. My reasoning is the shipping takes a month though I knew that going in to it. The shipping is horribly packaged. Their web page labeling is poor. For example when I first started vaping I ordered some "ego" batteries from them. I knew to be cautious of poor descriptions. The battery I got had ego on the side but was clearly not. It was short and fat vs long and skinny. The paint on the side was scratched up too. Also I placed an order for 20 of them to get a few spares for myself, my father and a couple co workers. All but 3 of the batteries where on and 12 scratched. I find it unlikely that those batteries bumped around magically and clicked themselves 5 times to be on. If just one of those had been pressed between other items in shipping it could have been bad. Same order I ordered 10 packs of coils. Out of 50 atomizers 7 worked. I suspect when ordering something like a kayfun clone they would be ok as that's harder to fail at but I won't give them my money. My reasoning such as it is. Look forward to hearing how the set up goes for you.

 

[saqueeb]

got my kayfun lite plus v2 yesterday, running on my MVP2 at 9.5w, 1.5ohm coil w cotton wick. great vapor but not a lot of flavor. my evod2 has more flavor. i followed rip trippers coil build, (normal, not the chimney coil) i dont have the juice channels blocked.

am i missing something? i have tried 2 different juices that taste great in my evod2 and my aspire bdc, in the kayfun the flavor is at least less than half of those clearomisers...

thanks