Lost Vape Efusion DNA200 Mini

[stylemessiah]

I almost bought the full size one secondsies the other week for a steal, but i might hang out for one of these!

efusion mini Features:

Main Features:
Powered by Evolv DNA200 temperature protection board
With Evolv's Escribe software, dial in your perfect vape with over 93 options
User serviceable 900mAh 10 watt hour 11.1V 3 cell FullyMax lithium polymer battery
Utilizing an XT30 connector for maximum compatibility and user serviceability
Ball bearing sliding cover for easy access to battery compartment
Firmware upgradeable
Temperature Limit: 200°F - 600°F
Output Power: 1Watt - 200Watts
Supports resistance down to .05Ω
Uses Kanthal, Ni200 (Nickel), SS (Stainless Steel) and Ti (Titanium)
Precision CNC machined of 6063-T6 aluminum body
Polished and bright dip anodized gloss finish
Stainless steel 510 atomizer connector
Spring loaded nickel plated brass center pin
Integrated 1Amp micro-USB on-board balanced charger (cord included)
Dimensions: 90mm*50mm*26mm
Finishes: black, silver,sapphire blue, red, green, purple.
Standard cover material: Carbon Fiber, Natural Wood Skin.
Limited Edition Covers: New Zealand Abalone
Designed and Manufactured by lost vape

Apparently comes with woodgrain and carbon fibre wraps in the pack

And no pesky screws to get apart...slide off cover....

Ive also seen one early retailer also offering the option of a spare battery on their efusion Mini ordering page

Lost Vape wholesale

 

[cobalt327]

Be interested in how well the bright dip anodizing holds up. The kandy kolors are purdy for sure but sometimes not very durable. Elsewhere it's said to be made of 6061 T6 Al.

 

[nelsonm64]

I have an efusion 40w mini, the "epetite" and the anodized finish is holding up great after 3 months! wish more mods came with a more durable finish!!!

 

[Uncletattoowhat]

I almost got one of these the other day, but instead decided to finally re-supply my DIY flavorings. I'm still keeping my eye on it though.

 

[retird]

Deleted ... wrong video.... sorry....

 

[bullhcr]

I was tempted by this one until I noticed the size. 90x50x26mm isn't exactly "mini" for a regulated mod with a 10Wh capacity.

 

[nelsonm64]

different Mod this thread is for the "mini" effusion.

 

[nelsonm64]

I was tempted by this one until I noticed the size. 90x50x26mm isn't exactly "mini" for a regulated mod with a 10Wh capacity.

the regular efusion dna 200 is only 85mm tall. not to sure why this one is taller.. taller battery I'm guessing...

 

[IMoL]

I have the regular EFusion (and love it), but I'm not sure if I could manage with only a 900mAh battery. The 1300mAh in mine is about as small as I would want to go. Of course, you could buy two...

 

[nelsonm64]

I have the regular EFusion (and love it), but I'm not sure if I could manage with only a 900mAh battery. The 1300mAh in mine is about as small as I would want to go. Of course, you could buy two...

I like the fact you can remove the battery in the mini as to the first version. I might get one down the road when the price goes down

 

[IMoL]

I like the fact you can remove the battery in the mini as to the first version. I might get one down the road when the price goes down

I agree, I like the sliding door of the mini. At least the battery on the standard one is still user-servicable, it's just a bit harder to get at. I plan to buy a second battery for mine, not to use now, but for when the original one starts to lose capacity etc.

 

[fishwater]

I'm on the fence between this & the full size version but if you check their FB page they allude to a Duo version being released in a few weeks. Hmmm.....

 

[fishwater]

I just pulled the trigger on a mini from vapor DNA. I really like everything I've seen from Lost Vape so decided that having battery access was worth getting a smaller battery vs the full size version.

 

[fishwater]

New review, mine should be here maybe today but definitely by tomorrow.

 

[fishwater]

Here you go, really nice feel in the hand. Box is clean as a whistle & really well made. The finish is perfect, I'm really pleased so far.

 

[nelsonm64]

do the panels feel solid on the mini? I have an efusion mini (epetite) DNA40 and, the only thing I don't like is that the battery panel feels spongy.... not a solid fit. not loose but, spongy

 

[fishwater]

The panel feels very firm & seated, I have absolutely ZERO negetives with the construction or fit & finish.

 

[fishwater]

Also important to note that it came set up from lost vape with Ni200, Ti & 2 SS modes. Battery & mod resistance was also already set up

 

[Akuma888]

Also important to note that it came set up from lost vape with Ni200, Ti & 2 SS modes. Battery & mod resistance was also already set up

Now that's the way it should be for any DNA200 mod coming out from the factory.

 

[jstrong]

Does it come with the wood or carbon panels on it?