Low Resistance VS High Voltage

[CraigHB]

For something highly compact, you'll probably do best with the eGo booster. It's not cheap and does have it's power limitations, but it's going to be the smallest VV device you can find short of going to a DIY box mod or production device like the Pro-Vari or Darwin.

 

[hairball]

Hello all. I'm currently using a Riva + Boge 510 LR cartos, a major upgrade for me over the kr808d-1 with standard resistance cartos. I've been looking into upgrades I may want in the future and have seen people talking about higher voltage (I'm particularly interested in 5v). I was wondering if I'd notice a major difference (as i did going from kr808 SR to riva LR) going from LR on Riva to a higher voltage device?

I don't care for 5V and above. The problem is distortion of flavors and if you're not careful, a nasty burnt taste. However, may people enjoy it so it's a personal preference.

I read somewhere that using LR at standard wattage is the equivalent of using a higher voltage PV with normal resistance cartos. If this was the case though then why would people buy 100+ dollar high voltage mods (I doubt this is the case)?.

No it's not. It's suppose to simulate 5V vaping but it's not the same. I would rather use low resistance cartomizers vs. 5V devices. Again, personal preference.

I've been looking at the GLV2 from greatlakesvapor.com and the Infinity from notcigs.com (doesn't look as nice aesthetically imo but is variable voltage which is a +). Id love it if someone who has owned both could compare the two. Which were you happier with?

Variable voltage is the way to go. I owen 5 Buzz's from notcigs and wouldn't trade them for the world. I have another one that hopefully will be on the way next week.

I wouldn't be buying a mod for at least a month or two, are there any amazing mods being released soon that I should wait for?

Buzz Pro and Infinity Pro. Pre-orders for the Buzz Pro are being taken now.

 

[JW50]

Thanks for info. Never heard of eGo booster before. But out of stock at moment.

 

[reprisal]

Thanks for all of the responses. What is the difference between the Infinity and the Infinity Pro that is coming out? Will the price be similar?

 

[wv2win]

To Craig and/or WV - apparently quite experienced modders - with thoughts of benefits to OP - is there a mod that is close in size and shape to an eGo 650 mah or Riva 700 mah that could be used with tank attys or similar or an eGo-T tank, that give finished form comparable to eGo-T, but that provide higher and variable voltage. Or alternatively, an inexpensive starter step toward variable voltage. (It occurs to me that inexpensive 1/2 steps may be waste of money but, if case, would like to hear it from the more experienced. Perhaps everyone should have Darwin if affordable?)

I'm not familar with the eGo Booster, so I don't know what it's battery life is like or any other advantages or disadvantages.

From a form factor, the closes variable volt that I am aware of would be the Infinity.

 

[fender0942]

I have a provari and almost never go above 5 volts . Most of the time the sweet spot is at 4.4 volt . I think some people miss the point of a VV mod . It is not to crank up the voltage for bragging rights it is to dial in the perfect voltage for the atty or carto that your using . I stick with 3ohm cartos but I do have some HR attys . Above 5 volts you need HR gear . I almost gave up on tanks until I got my provari . Don't forget higher voltage is harder on your gear so it may not last as long . Also using higher voltage you will go through more eliquid just as you do with a LR carto .

I wanted a HV mod so I bought a provari. I drip with standard resistance atties around 2.2ohm and use those at 4.6V. I use dual coil carts 1.5ohm at 4.2V. I never go above 4.6V. You are so right about VV. Using a HV atty at 6V is no different than a standard resistance atty at 4.6V. In theory with those settings you generate the same power (wattage). It's just nice to know if you need the extra push you got it.

 

[JW50]

I wanted a HV mod so I bought a provari. I drip with standard resistance atties around 2.2ohm and use those at 4.6V. I use dual coil carts 1.5ohm at 4.2V. I never go above 4.6V. You are so right about VV. Using a HV atty at 6V is no different than a standard resistance atty at 4.6V. In theory with those settings you generate the same power (wattage). It's just nice to know if you need the extra push you got it.

With eGo booster and claim of being able to take regular eGo bat up to 4.7V, and variable down to 3.3 V, and given your's and BD's statements about usual voltage use range, it is sounding as if the eGo boost might be a wise choice. Price quoted by seller link given by CraigHB was 60 bucks. But - out of stock. Device appears as if it would add about 1.5 or so inches to overall length.

 

[mistinthewoods]

Thanks for all of the responses. What is the difference between the Infinity and the Infinity Pro that is coming out? Will the price be similar?

I guess I'll answer your question, to the best of my knowledge.
I own a Buzz and have used it pretty much exclusively since last December. Fixed voltage no longer makes sense to me. Some juices taste better with a small tweak on the power and VV gives you the freedom to experiment with different attys and cartos of different resistances.
The Pro series that NotCigs is releasing (Buzz Pro comes out tomorrow) has new circuitry that greatly improves battery life. It regulates the power more efficiently. Beta testers have reported an average of twice the charge time they got with the previous tech. Personally, I vape like a steam engine (6+ mls a day) and get a pretty regular 6 hours of charge time out of my Buzz. I expect 12 hours out of the Buzz Pro I ordered the other day.

 

[BuzzKill]

Thanks for all of the responses. What is the difference between the Infinity and the Infinity Pro that is coming out? Will the price be similar?

Go to our forum and I can answer any questions you might have Notcigs

 

[fender0942]

With eGo booster and claim of being able to take regular eGo bat up to 4.7V, and variable down to 3.3 V, and given your's and BD's statements about usual voltage use range, it is sounding as if the eGo boost might be a wise choice. Price quoted by seller link given by CraigHB was 60 bucks. But - out of stock. Device appears as if it would add about 1.5 or so inches to overall length.

I found them in stock yesterday. Let me see if I can find the link for you

 

[fender0942]

I can't remember if it was yesterday or Friday but I had one in my cart, and almost bought it. Then figured it was a waste because I have a provari. Here is the link anyway even though it's out of stock

Canadian electronic cigarette Happy/Joye eGo, Booster

 

[fender0942]

Thanks for info. Never heard of eGo booster before. But out of stock at moment.

Scott Bonner (igetcha69) has a great walkthrough/review of the ego booster. Just look on YouTube. Type in igetcha69 ego booster.

 

[CraigHB]

Yea, he does great reviews, high quality video and good commentary, though he's a bit lacking on the technical information, but a very minor compalint.

 

[fender0942]

Yea, he does great reviews, high quality video and good commentary, though he's a bit lacking on the technical information, but a very minor compalint.

Yea he's great. He's the only reviewer that after I watch his review, I know whether or not I want the product. His revolution v2 review did just that for me. I was gonna buy it then after the review I decided it wasnt for me. I love Scott. Him and Grimm are my favorites.