LT Question/Woes

[bmonster]

I've got an LT that I use almost exclusively. I also have an iPro, which is good, but I like vaping at higher voltages, and find the LT gives a better hit.

However, I've been running into an issue. Seems that the LT keeps resetting itself back to 3.0v. I'll set the voltage up to, like 4.3, and go to take a draw, the display will flash, and reset back to 3.0.

Any ideas what may be going on with it?

 

[bruiser]

Are you using low resistance cartos/attys/tanks with it? Some of the LTs have a lower amp cut off and will reset if the resistance is to low.

 

[bacc.vap]

Clean your spring and both ends of the battery, and if you can get all the way in there, also the pos. connection. End cap threads too.
Edit: Pull the spring out just a little bit also.

 

[meeems]

Geeezus, what DOESN'T go wrong with a LavaTube.

The one i bought was under the guise of Knight Rider.

The first thing that happened was the top kept sliding up, i finally had to crazy glue it, so it wouldnt pop out completely.
The second thing that happened was the inside/middle part would pop out with the two wires, i had to crazy glue that center piece in.

Great, so now its perfect right?....wrong......now it misfires every other puff..... i wouldnt even give this away. This all happened less than a month after i bought it.

Thank God I got smart and saved up for the Provari v2 with 18650 extension. smartest thing i ever did. because that LT was an effing nightmare...

If you must get a LT, dont get the one named Knight Rider

 

[steved5600]

Geeezus, what DOESN'T go wrong with a LavaTube.

The one i bought was under the guise of Knight Rider.

The first thing that happened was the top kept sliding up, i finally had to crazy glue it, so it wouldnt pop out completely.
The second thing that happened was the inside/middle part would pop out with the two wires, i had to crazy glue that center piece in.

Great, so now its perfect right?....wrong......now it misfires every other puff..... i wouldnt even give this away. This all happened less than a month after i bought it.

Thank God I got smart and saved up for the Provari v2 with 18650 extension. smartest thing i ever did. because that LT was an effing nightmare...

If you must get a LT, dont get the one named Knight Rider

Even with a provari you still have to be aware of the wattage. IF you use to high a wattage the provari will start popping up with E2 errors. You have a current limit on any battery. This chart may help a little.

View attachment 140357
Using higher than say 8-10 watts will shorten the life of the atty and could damage the battery. I had a provari that disliked my early high wattage use and had to send it in.

 

[Unforeseen]

Moved to APV Model Specific Discussion - Lavatube