Magneto and a kick

[Fittytigsic]

Hey y'all!!!

Okay so I found a really outdated thread on fitting a kick(v1 or v2) in a magneto with an 18650 battery and there was no definitive answer. BY THE WAY, I have the newer version of the magneto.
I have been doing some research and I know that a magneto as it comes will not fit a kick(will it fit a crown kick??????????)
But I found a longer telescopic sleeve for the sigelei Silver Dragon that looks like it should be able to fit onto the magneto.

Does anybody have both of these mods and could tell me if this would work?
I really want to keep my magneto but I also want to try a kick! Please help

Thanks!

Also, if there are any other kinds of kicks that will fit in a magneto please let me know!!!

 

[Fittytigsic]

Anybody? haha

 

[dice57]

Don't have either, but do have a kick 2. Had heard that switching that tube may work, can't verify, and one guy I read was able to get the kick to work on the magneto but threads were showing with a 18650, but think he used a flat top IMR. In any event, if you have an 18490 the kick should work with the magneto with no modifications. And am surprised how much run time I can get with the kick 2 at 15 watts with a 18490 1100 mha battery. Longer run time than I can with the Provari with max output with a 18650 2000 mha battery.

Sorry can't be of more help, but own different mechs.

 

[liquidzoo]

I have a new version (brass) Magneto sitting in front of me in 18650 mode with a flat top MNKE battery and I can tell you with near absolute certainty that a kick wouldn't fit in it as is. There just doesn't seem to be enough threading on the inner tube to allow that much space. 18490 and maybe 18500, sure.

That said, I'm not sure if switching the inner tube is something that can be done. It would depend a lot on the thread pitch and the diameter of the tube on the Silver Dragon.

 

[stylezuk]

18490/18500 will fit with a Kick/Kick 2 defo not 18650, crown kicks aren't much different in size as still bigger than a fuse, regarding tube only one way to find out try it there is a chance but I'd be betting that you'll just be wanting a Mod with a Kick ring or using 18490/18500 to which isn't all that bad a deal.

 

[MassiveKlouds]

I have a Magneto, I kicked it with a 18490/18500. Anything bigger would not work. About the tube, I dont have one but let me know when you find out. Please and thank you! Happy Vaping!

 

[Fittytigsic]

Thanks to everyone who replied!!!

I tried a kick in my magneto with an 18500 last night and it didn't seem to fit because of a side pin that stuck outside of the tube. I was about to purchase an 18500 battery and the kick and I asked to make sure it fit as I was getting rung up….it didn't fit D:
I am definitely going to invest in some AW IMR 18650s.
What are some other ways to improve my magneto's performance besides a kick??

 

[somdfisher]

PBarsardo I think that's how it is spelled had a kick 2 in a magneto. He fed it in from the bottom of the tube so he wouldn't have to fight with the pins.

 

[liquidzoo]

PBarsardo I think that's how it is spelled had a kick 2 in a magneto. He fed it in from the bottom of the tube so he wouldn't have to fight with the pins.

Pretty sure it's PBusardo

And yes, he fed it through the bottom of the telescope tube. I think he was using an 18490. I watched the video (again) the other day but I can't remember for sure.

Sent from my Kindle Fire HDX

Quando Omni Flunkus Moritati

 

[ankush]

The Magneto with Kick will fit 18350, 18490, or 18500. That's it. The Nemesis comes with a Kick ring and will work with an 18650 as well.