Make your GG VW (Zorbas VW Tube)

[Spiralnebel]

Just would like to chross link my thread
so it gets the attention it must get

This module just satisfies me so much
that i must share it with all of you

Finaly my GG has wattage regulation

http://www.e-cigarette-forum.com/forum/variable-voltage-apv-discussion/415116-zorbas-vw-tube.html

 

[Killjoy1]

Looks cool, but a little on the pricey side (at least for those of us across the pond). There are quite a few VW modules hitting the market lately: the Can (has external adjustment pot), the Crown (uses the mod's button for adjustment), etc.

 

[Spiralnebel]

But none of them is ablte to offer up to 18 watts ... and has a serial

 

[Killjoy1]

haha, didn't catch that bit. well we all have our priorities ;-)

 

[fright88]

Interisting. Wonder if you could take the internals out and modify it to fit into a GG tube. While I like the idea I would prefer to be able to use the GGTS with it's native connections when using GG attys.

 

[Twitteliedoe]

Very interesting but very steep price. Thanks for sharing though.

Sent from my Galaxy Nexus using Tapatalk 2

 

[Runju]

Interisting. Wonder if you could take the internals out and modify it to fit into a GG tube. While I like the idea I would prefer to be able to use the GGTS with it's native connections when using GG attys.

Just a matter of threads ??? would have been great to have between collectortank and battery. Anyway ... one is heading my way

 

[Spiralnebel]

Interisting. Wonder if you could take the internals out and modify it to fit into a GG tube. While I like the idea I would prefer to be able to use the GGTS with it's native connections when using GG attys.

i would prefer it this way too but if i understoud it well
gianni sayed that it would be not possible to offer such a
huge wattage range if zorbas would be made like the kick
cause it need to be grounded like the kick to the side and
such a small spring can not handle it.

With Ithaka and Kayfun its even no problem cause you
are still able to use the air control but i prefer that big
stady ggts cpnnection too and it would look just a little
bit better

I already told him to think about obuilding a slitly bigger
in diameter module in polished finish

now i just would like to have silver plated brass
parts so the connectivity would be better cause somethimes
it just not fires at the first hit as we know from kick
and as you can see in one of the vidoes as better and
constant the connection between button pin and axis is
the more stable the wattage stays.

I love my ggts but thats a point i think about to buy a 69 mod...

I would also like to have a small gap for a thin o-ring at the
threads between the module itself and the bottom cap and
a slitly larger middle pole or better an ajustable one cause
even if the upper and bottom parts need to be screwed counter
clockwise to open it happens if you screw on your atomizer.

In every other point this module just satisfies me very much
cause it just makes the whole game so much easier cause you
do not need to worry about perfect coils to the battery you use.

I have set it right now to 12 watts and love how powerfull my
ggts is now able to fire and it finaly remains constant wattage
so no dealing with voltage dropping.

I think zorbas is just at the beginning so hopefully gianni wil
listen to his customers opinions and work on some small things
that would be even improve this great add on.

By the way - You can enter the setup by fireing the button three
times and keep holding it. First it shows the actuell setting by
blinking the led and if you keep holding it it continues to blink
a little bit slower and you just leave the button if you reached
the wattage you would like to have very easy andy handy!
The led seems to be green, orange and red but i can not say for
sure when it shows which color cause i am visually impaired and
can not distinguish the colors but i am sure you will found out quickly

 

[imeothanasis]

avoid all plated contacts spira, they will be much worse than brass when they will peel, and they will peel very soon. As for zorbas, I cant say many things about it just because its not my job, if you know what I mean. Of course people can buy it if they like

 

[Spiralnebel]

avoid all plated contacts spira, they will be much worse than brass when they will peel, and they will peel very soon. As for zorbas, I cant say many things about it just because its not my job, if you know what I mean. Of course people can buy it if they like

Then it would be maybe a good improvement to GGTS
if you can build a solid & squared brass axis so the
button pin propebly touches it in a more reliable way.
All conntests are nearly new and get cleaned with touth
paste as bishop shows and they are shiny but i feel a
difference in how the zorbas fires in depency how hard
i hit the button and even then it happens that it do not
fires. Maybe there could be a cutted out square in the
axis. I do not use the fuse and as we know even without
a spring it can fires just we need to be carefull in how
deep we screw in nthe telescope.
I am looking forware to buy the new Stealth Cap as well.

 

[imeothanasis]

Be sure spira that GGTS fires better than all mods out there. Zorbas's maker said that the GGTS is the only mod that doesnt have contuctivity issues and that his electronic part works exactly as it was designed only on GGTS. He talked to other modders, asking them to improve their switches.

If your GGTS doesnt work as you want but its clean, it needs a new button spring and it will fire like new again. Springs dont live for ever

 

[LongHaul]

Be sure spira that GGTS fires better than all mods out there. Zorbas's maker said that the GGTS is the only mod that doesnt have contuctivity issues and that his electronic part works exactly as it was designed only on GGTS. He talked to other modders, asking them to improve their switches.

If your GGTS doesnt work as you want but its clean, it needs a new button spring and it will fire like new again. Springs dont live for ever

I could see a rounded groove cut all the way around the axis post and a matching button head switch post as a small improvement....but don't know how much (if any) better it would conduct


.

 

[imeothanasis]

The reality is that every time 2 surfaces come in touch, only 1-3 points comes in real contact Long. Especially on our switches that navigate inside their button cases. GGTS switch will be always better because you push it will palm, so the contact points may be more, especially when the surfaces are shined, something that I dont see in other mods. I dont think that most modders realise the need of shined contacts but I see that one by one start doing this.

I could see a rounded groove cut all the way around the axis post and a matching button head switch post as a small improvement....but don't know how much (if any) better it would conduct


.

 

[Bishopheals]

There will be something better coming down the pike.

 

[LongHaul]

there will be something better coming down the pike.

p&p


.

 

[d4mpf3r]

Looks great my Friend. Hope next time i could test the Zorbas when
we drink some Beer together !
In my view, the GGTS Setups are a littlebit to long but you could disabuse me soon.

Greetings

 

[Rajuisha]

That is soo expensive

 

[d4mpf3r]

True words....could´nt test it aither but i´m pretty happy with my ggts without zorbas...but i wanted to test ist too.

 

[Runju]

it works very well

 

[tomster64]

Could this work with a unregulated mod or just a mech? I have a e-pipe mod that I'd like 2 boost and this would look great on it.