Map Tanks

[Bekinder]

Hi, Want to find out about the smaller map tank to use with my chuck or SB. I am not understanding
exactly how these are used. Do you have to put them together yourself? What kind of atty
fits with them? Also don't quite understand the ratings on them, are they LR and HV?
What are some experienced map users opinion of them.

It does sound like I could quit my constant dripping, while driving; it's a problem. Would
like to find out if some come all "ready to go" or are they a hassle?

 

[haft2doit]

MAP tanks are a mod that stemmed from people making larger tubes for their CE2 cartomizers to hold more juice and provide better wicking action. They come prefitted with a CE2 with the tube cut off leaving a half inch of tube on the bottom. You can buy replacement precut CE2's or you can use a little pipe cutter to make your own. You can pull them out and push a new one in. The tank can be taken apart by popping the caps off for cleaning ect... The ohm rating determines how hot the coil will burn at a given voltage. The lower the hotter. You would fill using a syringe with a 20ga needle or a lure lock bottle with the same 20ga needle. There are two small holes at the top you fill through. The tank holds quite a lot of juice. I don't own one but I use CE2's to great effect. There is also THIS if you use an ego which is much the same for less. Hope that helps.

MAP tank video (video uses large map tank but the mini is the same just with a standard size CE2)


I recently heard about These Tanks which use standard cartomizers with a slit cut out at the base. Heard good things about them if you use Boge cartos or dual coils or any standard filler carto. You can also buy cartos pre cut for this one but it takes literally 1 sec to slice a slit in a carto. good luck

Liquinator video
`

 

[Bekinder]

Thank you haft2, sounds like a need for extra tools. This explained a lot to me, thank you for posting it.

 

[sierra22]

Also note that with the liquinator, you can use the CE2's as well, works just the same, cut the 2 slits, and slide it right into place, using it now!

 

[haft2doit]

Awesome. I might have to try this liquinator it sounds great. People seem to be having good luck with them.