could try maybe tape it then cut electrical tape would likely work best then just burn off the glue after
Mesh in RM2?
- Thread starter Jazzi Mike
- Start date
- th_trl_thread_readers 0
- Status
could try maybe tape it then cut electrical tape would likely work best then just burn off the glue after
Why didn't I think of that? Normally pretty good at this stuff. Exhaustion. Excellent idea Justice. I'll try that later.
Beat me to it. Masking or painters tape wrapped tightly, then cut through the tape. that is how we did it in the warehouse I used to work in. Those 2 tapes should not leave any glue behind.
Sent from the zoo using Tapatypo 2
So I'm about 4ml deep into some of your "Buck Swoke" and I am thoroughly enjoying it! Started on a 1.7Ω 30 kanthal micro on SS mesh, moved to a .8Ω 26 nichrome micro on cotton, and have graduated to a .5Ω micro of mundy's magic.
Absolutely delicious on all, but the mundy's really brings out the caramel and chocolate. I know it isn't steeped yet, so I can't give it a full review... But daggummit boogie nights! You've got a winner here!
Absolutely delicious on all, but the mundy's really brings out the caramel and chocolate. I know it isn't steeped yet, so I can't give it a full review... But daggummit boogie nights! You've got a winner here!
Awesome to hear! 
I mixed my own batch of the new ratio Tuesday and thinking it's finally right. Happy to send more of whatever. Did me a solid.
Any "caking"on the low low ohm coils? Try to keep flavoring low in most of my mixes. Had to go up to get the right ratio for that one.
I mixed my own batch of the new ratio Tuesday and thinking it's finally right. Happy to send more of whatever. Did me a solid. Any "caking"on the low low ohm coils? Try to keep flavoring low in most of my mixes. Had to go up to get the right ratio for that one.
haven't kept a coil long enough to answer that. Will report back after work tomorrow.
Durrr. I knew that. Asked without thinking. Would take a couple days anyway. Ha. Got carried away with the positive early review...
I use the mesh on both my Grand & Mini. 400 mesh with 4 to 5 wraps of 20 gauge kanthal works for me. I get about 5 to 8 hits per pump.
louis
louis
- Status
